Advertisement
Quick Links
5521DC Male
205+/-1mm
ZKtechnology.com
POE Splitter
User Manual
•
LS-PE1210G is a high-performance optoelectronic isolation POE product complies
with the IEEE 802.3af Ethernet standard, and with the size of 28*82mm and wire
length of 205mm. The output power meets the power consumption demand of
over 90% camera.
•
Chip: SD4952B. Compatible with 38~57V DC voltage, overvoltage protection.
•
POE Standard: IEEE802.3af
•
Compatible with non-standard 48V~57V power supply (only support with 45+78-).
•
Output Power: 15.4W (12V/1A)
•
Isolation: 1500V
•
POE Power Pin: support both (1, 2)+/(3, 6)- and (4, 5)+/(7, 8)-
•
Plug output: Data (1, 2)/(3, 6)
•
Power Output by 5521DC Male (5.5*2.1mm).
82+/-1mm
28+/-1mm
Input RJ45 Size
POE Splitter User Manual | April, 2019
Advertisement
Summary of Contents for ZKTeco LS-PE1210G
- Page 1 POE Splitter User Manual • LS-PE1210G is a high-performance optoelectronic isolation POE product complies with the IEEE 802.3af Ethernet standard, and with the size of 28*82mm and wire length of 205mm. The output power meets the power consumption demand of over 90% camera.
- Page 2 How to Use Correct Connection Using between POE Switch and NON-POE Device. The Active POE Splitter splits POE signal into a 12VDC power and 10/100Mbps Ethernet data source. Power 12V + DATA Power 48V + DATA Active POE Splitter 48V 12V Network Cable Power + Data NON-POE Device POE Device...
- Page 3 When the short circuit relieved, the product will automatically return to normal. © Copyright 2018. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product and company names mentioned are used for identifi...