Front Cover; Adjusting The Freezer Drawer - Kucht K748FDS Installation Manual And User's Manual

Hide thumbs Also See for K748FDS:
Table of Contents

Advertisement

Aligning the refrigerator doors
Caution
Risk of electric shock! Before removing top hinge cover
1. Shut off the water supply to the appliance.
2. Unplug the appliance or switch off the fuse.
If the refrigerator doors are not properly aligned.
1
Unscrew the top hinge cover and raise the panel
Do not disconnect any harness wire or water tube!
2
Loosen the fastener counterclockwise, move the hinge
sideway to adjust the refrigerator door.
Do not remove the fastener!
3
Tighten the fastener and replace the top hinge cover.

Adjusting the freezer drawer

If the freezer drawer is higher on one side than the other
(not even):
Adjusting the freezer drawer
If the freezer drawer is higher on one side than the other
1. Loosen the four side screws on the side where
(not even):
adjustment is needed.
1. Loosen the four side screws on the side where adjustment is needed.
2. Move the Stopper from 'left picture position' to 'right
2. Move the Stopper from 'left picture position' to 'right picture position'.
picture position'.
3. Adjust the leveling by rotating the Position Knob.
3. Adjust the leveling by rotating the Position Knob.
(Pull and rotate the Position Knob)
(Pull and rotate the Position Knob)
4. After adjusting the leveling, tighten the four side screws.
4.
After adjusting the leveling, tighten the four side screws.
1
3
2
1
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
F741-2(영).indd 17
INSTALLATION GUIDE AND USER MANUAL
2
3

Front Cover

After installation and/or door leveling, fasten front
cover with screws. (Remove the screws on the
front bottom panel first. Click and screw the cover.)
Caution
The front of refrigerator needs to be just a little
higher than the back for easy door closing, but if
the wheel is raised too much for door balance,
i.e. the front of refrigerator is much higher than
the back, it can be difficult to open the door.
Installing the handles
- After installation and/or door leveling, install the handles.
- All the handles are identical.
1
Insert refrigerator door handles into guide.
Fix the handle with screw (supplied).
2
Insert freezer door handle into guide.
Fix the handle with screw (suppled).
15
13
2018-01-16 오후 6:09:03

Advertisement

Table of Contents
loading

Table of Contents