Sony Bravia KDL-V32XBR2 Operating Instructions Manual page 21

qa qa
Insert two size AA batteries (supplied) by matching the e and E
on the batteries to the diagram inside the remote control's battery
compartment.
Button
qd WIDE
Changing the Wide Screen Mode
qd
qf
qg
qh
qj
qk
ql
qf DISPLAY
qg V/v/B/b
qh TOOLS
qj JUMP
qk 0 - 9 ENT
ql CH +/–
Description
Press repeatedly to step through the Wide Mode settings:
Wide Zoom, Normal, Full, Zoom. The Wide Mode settings
can be also accessed in the Screen settings. See page 29.
4:3 Original source
Standard definition source
m
Wide Zoom
Normal
Full
Zoom
When the TV receives a 720p or 1080i signal,
Normal cannot be selected.
Press once to display the current channel number, channel
label, time and Wide Mode settings. The on screen display
(OSD) will turn off after a few seconds or press again to
immediately turn off the display.
Press V/v/B/b to move the on-screen cursor. Press
select/confirm an item.
Press to display the Tools Menu that is associated with your
current input: Analog TV, Digital TV, or External Inputs. (See
page 26, 28, 31, 36 and 37.)
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel that
was selected among the digital or analog channels. It will not
cross over from digital to analog, or from analog to digital.
Press 0 - 9 to select a channel; the channel changes after two
seconds. Press ENT to change channels immediately.
Press to scan through channels. To scan quickly through
channels, press and hold down either +/–.
Basic Operations
(see page 29 for details)
16:9 Original source
High definition source
m
Wide Zoom
Normal
This mode is not available
Full
Zoom
to
21