Advertisement
Quick Links
Wireless That Makes Perfect Sense
Sensor Temperature Range:
Environmental Classification:
Transmission Frequency
Sensor Transmission Rate:
Parts List:
Quantity
1
1
2
4
Description:
The WP1P/WP2P Wireless Tilt Monitor is a low-power device that monitors discrete angular position and
maintains a count of tilt events. The count is incremented when the sensor is tilted forward from a vertical
orientation as shown below. The transmitter sends data at random intervals between 10 and 17 seconds. On
state changes, it transmits the updated data within one second. The battery will typically last from 2 to 5 years
depending on angular position change frequency.
Mounting:
The sensor must be installed as shown below or it may not accurately indicate position. The sensor bottom
should be horizontal as shown in the center figure.
Option #1: Attach the Wireless Tilt Monitor to the tilting surface using the provided Dual-Lock strips.
Option #2: Attach the Wireless Tilt Monitor to the tilting surface using the provided #6 x 1" self-drilling screws
or other suitable screws.
Option #3: Attach the Wireless Tilt Monitor to the tilting surface using the optional Mag-Mount Universal
Mounting Bracket (P/N# UMB-S2N - not shown).
9470 Meridian Way
West Chester, Ohio 45069
Phone: 513-874-3195
Fax:
513-874-3269
www.ventekllc.com
o
o
o
-20
C to 70
C
(-4
F to 158
NEMA 4X
WP1P = 418 MHz
WP2P = 433 MHz
10 to 17 seconds (random)
Part
WPxP Tilt Monitor with bracket
Magnetic Key Fob
1" x 2" (25 x 50mm) Dual-Lock Strips
#6 x 1" Self-drilling Screw
Wireless Tilt Monitor
Quick Setup Sheet
WP1P/WP2P
Page 1 of 3
o
F)
1
IOM00057-04
1
Advertisement
Related Manuals for Ventek WP1P
Summary of Contents for Ventek WP1P
- Page 1 #6 x 1” Self-drilling Screw Description: The WP1P/WP2P Wireless Tilt Monitor is a low-power device that monitors discrete angular position and maintains a count of tilt events. The count is incremented when the sensor is tilted forward from a vertical orientation as shown below.
- Page 2 Integer value between 0 and 32,767 specifying the data logging interval for the VenTek Sensor Database in minutes. A zero (0) value will log every data packet. 5. Close the Registered Devices window when finished. The window will close automatically after 1 minute of inactivity.
- Page 3 (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by VenTek, LLC for compliance could void the user's authority to operate the equipment. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.