Sony Bravia KLV-V26A10 Operating Instructions Manual page 58

Problem
The wide screen mode
changes spontaneously when
"Auto Wide" is "On"
"100" appears at the top of the
screen after approximately 10
seconds and there is no
teletext display
Teletext display is incomplete
(snowy picture or double
images)
Cannot play shooting games
The TV cabinet creaks
Static discharge is felt when
touching the TV cabinet
Cannot operate other
equipment on the remote
58
GB
Cause/Remedy
• During a transition between two programs, the TV detects the optimum
wide screen mode. During this period, an irregular wide screen mode may
appear.
• The wide mode is switched automatically according to the revised signal
with a Wide ID signal.
• The Auto Wide feature stops working temporarily when you press
resumes after a while. To fix in the manually selected wide screen mode, set
"Auto Wide" to "Off" in the "Screen" menu (page 38).
• The channel carries no Teletext broadcast.
• Your area may not be able to receive Teletext. Teletext is displayed only in
the area that is covered by Teletext services.
• The antenna connection is loose or the antenna cable is damaged. Check the
cable and connection on the TV, VCR, and on the wall (page 14).
• The antenna direction needs adjustment. Adjust the antenna direction.
Contact a Sony dealer for advice.
• Signal transmission is too low. Try using a booster. Otherwise, use the fine
tuning ("Fine) function (page 40).
• Some shooting games which involve pointing a light beam at the TV screen
with an electronic gun or rifle cannot be used with your TV. For details, see
the instruction manual supplied with the video game software.
• Changes in room temperature sometimes make the TV cabinet expand or
contract, causing a noise. This dos not indicate a malfunction.
• This is the same static discharge that is felt when touching metal door
handles or car doors especially when the air is dry, for example in winter.
This does not indicate a malfunction.
• Check that the remote is programmed correctly (page 49).
• Press the correct function key before operating the equipment.
, and