Introduction - Royal MB-30 User Manual

ROYAL Cash Drawer MB-30

INTRODUCTION

The MB-30 USB Cash Drawer has 5-bill slots that are sized to accommodate either
US, Canadian or Mexican paper currency. It also has a removable coin tray. The coin
tray is preset with 8-coin slots.
The coin separators, creating the walls between each coin slot, are removable and
can be re-positioned in another groove to change the size of each coin slot. Seven
separators (only six separators are removable) are already installed in the coin tray
to create 8-slots. To remove a separator already installed in the coin tray, lift out the
removable coin tray from the cash drawer. While squeezing the bottom of the plastic
separator where it inserts into the groove opening at the bottom of the coin tray, turn
the coin tray upside-down and use a flat-head screwdriver from the opposite side
to gently push the plastic locking tab out of the groove. Be careful not to break the
plastic. To install a separator into the coin tray, line up the separator in a groove with
the curved side of the separator facing down and into the coin tray matching the
shape of the coin tray. Be sure the separator is in only one groove and push it all the
way down into the coin tray until the locking tab clicks into position.
Unpacking
After unpacking the unit, please check that all the necessary accessories are included
in the package.
• 1x Cash Drawer, Pre-assembled
• 2x Keys
• 4x Bill Dispenser Dividers
• 6x Coin Dispenser Dividers
• 5x Metal Bill Clippers
• 1x User Manual
• 1x USB Trigger
2