Control; Initial Setup - Sony BRAVIA KDL-46VL150 Operating Instructions Manual

Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by
matching e and E on the batteries to the
diagram inside the battery compartment of
the remote control.

Initial Setup

The Initial Setup screen appears when you turn on the TV for the first time.
During this initial setup, you can perform the following:
1
Select the language for the on-screen display text.
2
Select HOME or Retail mode.
3
Connect cable or antenna, then select OK to run Auto
Program.
~
• If you have cable and antenna available, please connect cable first.
• IMPORTANT: Auto Program is only effective when cable or
antenna is connected. If you cancel Auto Program before completion some channels may not be
available.
4
Auto Program will scan for available channels from the signal source directly connected to
the TV's CABLE/ANTENNA input and may take sometime to complete the process. Follow
the help text provided on the screen to run Auto Program.
• When prompted to select HOME or Retail, be sure to select
HOME for ENERGY STAR compliant mode.
• If you use both cable without a box and antenna connections,
use an A-B RF switch (not supplied). For more details see the
online Reference Book.
• Select your preferred aspect ratio for the screen display.
Press WIDE to select the wide mode or press MENU and
set the Auto Wide to On under the Screen menu.
• To change the clock, press MENU and go to Setup menu
then select Clock/Timers and adjust Current Time.
Push to
open
Initial Setup
Please select your language:
Set
Initial Setup
Please select the type of use for this TV.
"Home" optimizes the picture for normal home use.
"Retail" optimizes the picture for store display.
Home
Retail
Set
11