Pivot Breath Sensor Quick Start Manual page 8

4
Giving a Breath Sample
Important:
• When submitting a breath sample, sit down,
and take a deep breath.
• Do not use the Pivot Breath Sensor while
operating any type of vehicle or machinery.
• Do not use the Pivot Breath Sensor around
children. The straw can be a choking hazard.
• Clean straw with soap and water. Dry
thoroughly before use.
Press and hold the button.
Inhale when you hear a beep
and the LED starts flashing
blue. Hold your breath and
release button.
Continue to hold your breath
for 10 seconds (minimum 8
HOLD!
seconds ).
After three beeps blow
gently into the sensor for
12 seconds.
Blinking
successful breath test, and
blinking
was not properly submitted.
1. If you are not able to hold your breath for 8 seconds, you should not use
this device.
1
green indicates a
red
means sample