MAMAC SYSTEMS TE-701 Series Technical Information

8189 Century Boulevard • Minneapolis, MN 55317-8002 • USA
800-843-5116 • 952-556-4900 • Fax 952-556-4997
sales@mamacsys.com • www.mamacsys.com
For Additional Information See TE-701/702 Data Sheet

SPECIFICATIONS

Platinum RTD Sensors:
±0.1% @ 32°F (0°C), Alpha: 385 per DIN 43760
Nickel RTD Sensors (#2):
±0.5°C @ 0°C (32°F), 5,000 PPM/K T.C.R.
Nickel RTD Sensors (#4):
±0.5°F @ 70°F (21.1°C), 6,000 PPM/K T.C.R.
Balco RTD Sensors:
±0.5°F @ 70°F (21.1°C), 4,300 PPM/K T.C.R.
Thermistor Sensors:
±0.2°C interchangeability @ 77°F (25°C)
Operating Temperature:
-40°F to 210°F (-40°C to 100°C)
Ambient Temperature:
-40°F to 160°F (-40°C to 70°C)
Probe Material:
1/4" (6.3 mm) O.D., 0.020" (0.5 mm) wall, 304 Stainless Steel
ORDERING INFORMATION: TE-701-
INSTALLATION TEMP SENSOR
Flange mount
A
100-Ohm Platinum RTD
1
3" (175 mm)
1,000-Ohm Nickel RTD
2
wire leads
(5,000 PPM)
B Flange mount
1,000-Ohm Platinum RTD
3
6' (1.8 m)
plenum cable
1,000-Ohm Nickel RTD
4
(6,000 PPM)
Bulkhead mount
C
3" (175 mm) 1,000-Ohm Balco RTD
5
wire leads
7 10,000-Ohm NTC Thermistor
(Type III)
D Bulkhead mount
6' (1.8 m)
10,000-Ohm NTC Thermistor
8
plenum cable
(Carel)
3,000-Ohm NTC Thermistor
10
10,000-Ohm NTC Thermistor
12
(Type II)
5,000-Ohm NTC Thermistor
13
1,035-Ohm Silicon PTC
14
15 100,000-Ohm NTC Thermistor
10,000-Ohm NTC Thermistor
16
...... ..(Eliwell)
20,000-Ohm NTC Thermistor
17
2,252-Ohm NTC Thermistor
18
21 1,800-Ohm NTC Thermistor
Example: TE-701-B-10-A: Flange mount with 6' cable, 3K ohm thermistor and 4" probe.
Flange Material:
Galvanized Steel
Bulkhead Fitting:
Brass with poly compression sleeve
Plastic Enclosure:
Polycarbonate 30% glass filled, rated UL 94V-5-0
Steel NEMA-1 (IP-30):
18 Ga. Galvanized Steel
Steel NEMA-4 (IP-65):
18 Ga. Cold Rolled Steel, Powder coated
Warranty:
Five Years (Lifetime on Moisture Migration)
EMC Conformance:
EN 55022, 55024, 61000-3-3, 61000-4-2, 61000-4-3,
61000-4-4, 61000-4-5, 61000-4-6 & 61000-4-11
U.S. PATENT NO. 6457857, 6555748, 7036224
ORDERING INFORMATION: TE-702-
PROBE LENGTH INSTALLATION
Polycarb Plastic
A
4" (100 mm)
A
Enclosure (IP-54)
B 6" (150 mm)
Galvanized Steel
B
Enclosure
8" (200 mm)
C
(NEMA-1 / IP-30)
12" (300 mm)
D
Painted Steel
C
Enclosure
(NEMA-4 / IP-65)
Example: TE-702-A-3-D: Polycarb plastic enclosure with 1K ohm Platinum RTD and 12" probe.
Model TE-701/702

Technical Information

RoHS
DUCT TEMPERATURE SENSORS
TEMP SENSOR
100-Ohm Platinum RTD
1
1,000-Ohm Nickel RTD
2
(5,000 PPM)
1,000-Ohm Platinum RTD
3
1,000-Ohm Nickel RTD
4
(6,000 PPM)
1,000-Ohm Balco RTD
5
7 10,000-Ohm NTC Thermistor
(Type III)
10,000-Ohm NTC Thermistor
8
(Carel)
3,000-Ohm NTC Thermistor
10
10,000-Ohm NTC Thermistor
12
(Type II)
5,000-Ohm NTC Thermistor
13
1,035-Ohm Silicon PTC
14
15 100,000-Ohm NTC Thermistor
10,000-Ohm NTC Thermistor
16
....... .(Eliwell)
20,000-Ohm NTC Thermistor
17
2,252-Ohm NTC Thermistor
18
21 1,800-Ohm NTC Thermistor
TI.701/702-03
PROBE LENGTH
4" (100 mm)
A
B 6" (150 mm)
8" (200 mm)
C
12" (300 mm)
D