Advertisement
Application and Methods
Measuring the Fit‐Up Gap (Figure 7) and (Figure 8)
To measure the fit‐up gap turn the gauge to the back side. Lower the rotating fan so that the
point of the gauge is free from contact with the main gauge itself. The range of measurement
th
th
allowed on the point of the is 0.5mm to 5mm (1/32
to 3/16
inches ) . Lower the point in‐
between the gap. Continue to lower until both sides touch the top of the gap. Read
measurement from the lines on the rotating fan.
Figure 7
Figure 8
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net
Advertisement
