Getting Started; Quick Start Tool; Mac Users Only - Focusrite Scarlett 2i2 Studio User Manual

GETTING STARTED

With the Third Generation, Scarlett interfaces introduce a new, faster way of getting up and running,
using the Scarlett Quick Start tool. All you need to do is connect your Scarlett 2i2 to your computer.
Once connected, you will see that the device is recognised by your PC or Mac and the Quick Start tool
will guide you through the process from there.
IMPORTANT: The Scarlett 2i2 has a single USB 2.0 Type C port (on the rear panel): connect
it to your computer using the USB cable provided. Note that Scarlett 2i2 is a USB 2.0 device,
and thus the USB connection requires a USB 2.0+ compliant port on your computer.
The Scarlett 2i2 gets its power from your computer via the USB connection: there is
no need for a separate power supply. However, we do recommend that when using it
with a laptop, the laptop should be powered using its AC adaptor, as otherwise the battery
will run down faster than when powering the laptop alone.
Your computer will initially treat your Scarlett as a Mass Storage Device (MSD), and during its fi rst
connection, the Scarlett will be in "MSD Mode".

Quick Start Tool

We have tried to make registering your Scarlett 2i2 as simple as possible. The procedure will probably
be self explanatory, but we have described each step below, so you can see how they should appear
on either a PC or a Mac.

Mac users only:

On connecting your Scarlett 2i2 to your Mac, a Scarlett icon will appear on the desktop:
5