Coinco Vantage Series Installation & Operation Manual

Vantage™ Series Bill Acceptor
Introduction
The Vantage™ Series bill acceptors represent
another milestone in Coin Acceptors, Inc. history of
innovation. These advancements continue to provide
Coinco customers with improved reliability, simplifi ed
route operations, and increased profi tability.
Product Overview and Features
The Vantage acceptor incorporates a wide range of
benefi ts, including:
• Quick-Release Bezel speeds installation and
removal.
• Optional FlexStack™ bill box expands from
200 bills to hold up to 500 bills. Fixed note
bill boxes are available with between 300 and
1100 note capacities.
• Illuminated bezel and status indicators simplify
setup and troubleshooting.
• Patented note path lockout provides high
security Level Three stringing and fi shing
protection.
• Smart Bezel™ feature (optional) actively
communicates ability to accept $5 bills.
For Your Records
A label indicating the model number and serial
number can be found on the side of the Vantage bill
acceptor. Refer to the model number and serial
number whenever you call your Coinco Service
Center for information or service.
The fi rst four digits of the bill acceptor serial number
indicate when the unit was built, which is also the
beginning of the warranty period:
• First two digits: indicate week of manufacture.
• Third and fourth digits: indicate the year.
For example, Serial number 1508000123 indicates
the unit was manufactured in the 15th week of 2008.
Bill Acceptance
Bill Bill
Model Model $1 $1
Width Width
x x
V x6xx2xU S V x6xx2xU S
x x
66m m 66m m
V x6xx4xU S V x6xx4xU S
x x
V x6xx6xU S V x6xx6xU S
V x7xx3xC A V x7xx3xC A
72m m 72m m
V x7xx5xC A V x7xx5xC A
Installation & Operation Guide
$5 $5 $10 $10 $20 $20 $50 $50 $100 $100
x x
x x x x x x
x x x x x x x x x x
x x x x x x
x x x x x x x x x x
Vantage
™
Billbox
Access
Lid
Billbox
Harness
Connection
(Non-MDB)
Harness
Connection
(MDB)
Quick
Release
Bezel Tab
Data Port
Input Power and Interfaces
Model
Voltage Hertz
#
VAx1
110VAC
VLx1
60Hz
VLx2
24VAC
VXx3
34VDC NA
1
Components
Billbox
Release
Option
Switches
(Far Side)
Inlet Bezel
Bill Inlet LEDs
Diagnostic
Service Mode
Button
Figure 1
Amps Interface
Amusement Pulse,
Vend Serial
0.7A rms
(max) Pulse, Parallel,
Vend Serial, MDB
2.5A rms
Pulse, Parallel,
(max)
Vend Serial,MDB
1.8A
MDB
(max)
LED