Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nomix Enviro Stem Master
Summary of Contents for Nomix Enviro Stem Master
- Page 1 Safe and effective control of invasive weed species InstructIons...
-
Page 2: Table Of Contents
1: Introduction section 2: component List section 3: Preparing the stem Master for use Personal Protective Equipment (PPE) Connecting the needle Filling the bottle with herbicide Checking for leaks Priming Calibrating section 4: operating the stem Master section 5:... -
Page 3: Introduction
We have designed the Stem Master to be robust and easy to use. It is supplied in a hard case for easy and safe storage when not in use. -
Page 4: Component List
section 2: component List Two needles (with guard) Trigger Handle grip Piston assembly... - Page 5 Bottle Air Intake Valve Allen Key Grease...
-
Page 6: Personal Protective Equipment (Ppe)
Secure the needle by equally tightening the three grub screws on the needle adaptor. Filling the bottle with herbicide • Hold the Stem Master upside down and unscrew the bottle in a clockwise direction. Place the Stem Master in a safe location... -
Page 7: Checking For Leaks
Turn the bottle in an anti-clockwise direction to tighten. checking for leaks Hold the Stem Master in an upright position and check carefully for any leaks around the bottle, trigger and air intake hole. If a leak is found: Bottle –... -
Page 8: Calibrating
3: Preparing for use (cont.) calibrating The Stem Master is an accurate herbicide delivery system, calibrated by a simple twist adjustment dial on the end of the handle grip. • The calibration dial is graduated in 0.5 ml increments... -
Page 9: Operating The Stem Master
The Stem Master should not be used without the needle guard attached. Always be careful when handling the Stem Master, as the needles are extremely sharp. -
Page 10: Cleaning The Stem Master
• Immerse the Stem Master in soapy water, without the bottle and the handle grip attached • Whilst the Stem Master is in the water, squeeze the trigger several times • Triple rinse the bottle and clean the handle grip •... - Page 11 Detach the piston from the keyhole slots in the side arms and pull the piston from the main body of the Stem Master. Then remove the spring from the piston. 4) Wash and rinse the piston and spring, then allow to dry.
- Page 12 The Stem Master contains intricate components which if lost, broken or incorrectly replaced, will render the unit inoperable and invalidate the warranty. If the Stem Master is not functioning correctly, contact Nomix Enviro to arrange repair on 01264 388050.
-
Page 13: Servicing
7: servicing We recommend the Stem Master is serviced by Nomix Enviro on an annual basis. - Page 16 Enviro A division of Frontier Agriculture Ltd The Grain Silos Weyhill Road Andover Hampshire SP10 3NT 01264 388050 01522 866176 nomixenviro@frontierag.co.uk www.nomix.co.uk USe HeRbicideS SAFeLy. ALWAyS ReAd THe LAbeL ANd PRodUcT iNFoRmATioN beFoRe USe.