Advertisement
Advertisement
Table of Contents
Summary of Contents for Manufacture Royale Opera
- Page 1 INSTRUCTION FOR USE AND SETTINGS Opera...
- Page 2 If you notice any discrepancies in the rate of movement, we recommend that you have your timepiece tested by your authorized Manufacture Royale partner, who will take care to do whatever is necessary to ensure the accuracy of your watch.
- Page 3 SETTING THE TIME Winding (position 0) The winding is carried out by turning the crown clockwise. The movement is fully wound when the crown is blocked. Be careful not to force beyond the blockage as you will damage the movement. Your timepiece has a power reserve of 108 hours, but we recommend that you wind it up daily to ensure optimal operation.
- Page 4 TRIGGERING THE MINUTE REPEATER __________________ __________________ The trigger (B) of the Opera located at 9 o'clock on the bezel allows the minute repeater mechanism to be armed. To do so, it must be pulled to the full towards 11 o’clock and then released.
- Page 5 WATER RESISTANCE ________________________ ________________________ Your Manufacture Royale watch is water-resistant to 3bar/atm. It is recommended to use your watch according to its waterproofing characteristics. To protect the movement from moisture, make sure that the crown is always pushed back against the case (position 1), especially after setting the time or adjusting the functions if necessary.
-
Page 6: International Warranty
Manufacture Royale dealers. Maintenance and repair work must also be carried out by an authorized Manufacture Royale dealer. If these conditions are not met, no warranty claims may be made. Any part found defective due to a manufacturing defect duly noted by our technical services will be repaired or replaced free of charge, at the discretion of Manufacture Royale.
Need help?
Do you have a question about the Opera and is the answer not in the manual?
Questions and answers