Table of Contents
Advertisement
Quick Links
ESB6-RA30/45/60
Right-Angle Nutrunner
Operation Manual
CAUTION — Please read, understand, and follow all operating and safety instructions in
this manual before using a ESB6-RA nutrunner.
If you have any questions or concerns, please contact us at:
Delta Regis Tools Inc.
6945 NW LTC PKWY
Port St. Lucie, FL 34986
USA
Doc. ESB6-RA_Manual_r0
Copyright © 2017 Delta Regis Tools Inc
Ph +1-772-465-4302
Fx +1-772-465-4368
Email: sales@deltaregis.com
Website: www.deltaregis.com
Advertisement
Table of Contents
Related Manuals for Delta Regis ESB6-RA30
Summary of Contents for Delta Regis ESB6-RA30
- Page 1 If you have any questions or concerns, please contact us at: Ph +1-772-465-4302 Delta Regis Tools Inc. Fx +1-772-465-4368 6945 NW LTC PKWY Email: sales@deltaregis.com Port St. Lucie, FL 34986 Website: www.deltaregis.com Doc. ESB6-RA_Manual_r0 Copyright © 2017 Delta Regis Tools Inc...
- Page 2 • Use only the factory specified Delta Regis brand replacement parts and accessories with these tools. • And damage to the tool, battery, and/or battery charger resulting from misuse, abuse, or failure to follow these guidelines will void the limited product warranty.
-
Page 3: Specifications
ESB6-RA30/45/60 Right-Angle Nutrunner Operation Manual Read Manual Caution Recyclable Indoor Use Only Keep Away From Humidity Keep Away From Fire Do Not Disassemble Do Not Dispose Contents • Right-angle nutrunner (1) • Accessory kit (1) - Torque ID rings (3) - Page 4 ESB6-RA30/45/60 Right-Angle Nutrunner Operation Manual Tool Overview Torque ID Ring Can be fitted around the nose of the tool to visually indicate a specific torque setting Torque Adjustment Key Used to adjust tool torque setting (see pg. 6) LED Light...
- Page 5 ESB6-RA30/45/60 Right-Angle Nutrunner Operation Manual Quick Set-Up and Operation Overview 1. Fully charge the battery using the battery charger before first use to achieve maximum fastening cycles. 2. Ensure that the screwdriver’s FWD/REV switch is ‘OFF’ (central position). 3. Install a power socket onto the tool’s square drive.
- Page 6 ESB6-RA30/45/60 Right-Angle Nutrunner Operation Manual Torque Adjustment 1. Remove the battery from the unit or lock the trigger with the Forward/Reverse switch to prevent the tool from starting up accidentally. 2. Slide the torque safety cover open. Rotate the shaft until a semicircular notch becomes visible and insert the chuck key.
-
Page 7: Parts And Accessories
ESB6-RA30/45/60 Right-Angle Nutrunner Operation Manual Parts and Accessories If you require parts or accessories for your Delta Regis product, please refer to our website or contact us for further information. Service This device is not user serviceable. Any repairs must be performed by a Delta Regis authorized service center. Please consult Delta Regis Tools for further information and the location of the nearest authorized service center.
Need help?
Do you have a question about the ESB6-RA30 and is the answer not in the manual?
Questions and answers