Rego P Series User Manual

Led area flood lighting

Table of Contents

Download this manual

P-Serie

User Guide

LED Area Flood Lighting

Document Revision – V 1.0_E

Safety precautions

1. Electrical work must be performed by a qualified licensed electrician.

2. Disconnect or turn off power before installation or servicing.

3. Do not take apart or modify the product.

4. Do not drop the product or apply a strong impact to it.

5. The manufacturer or the seller do not bear liability for damage caused by inappropriate use or application.

6. Contact the manufacturer or the seller for inquiry when there is a problem with the product.

For luminaires with type Y attachments, the mounting instructions shall contain the substance of the following information

for type Y attachments

If the

external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent

or a similar qualified person in order to avoid a

hazard

Table of Contents

Do you have a question about the P Series and is the answer not in the manual?

Page 1: Safety Precautions
P-Serie User Guide LED Area Flood Lighting Document Revision – V 1.0_E Safety precautions 1. Electrical work must be performed by a qualified licensed electrician. 2. Disconnect or turn off power before installation or servicing. 3. Do not take apart or modify the product. 4.
Page 2 User Guide P-Serie LED Area Flood Lighting Product Dimension (Swivel Bracket) Bracket Dimension AC Power Cable ...
Page 3 User Guide P-Serie LED Area Flood Lighting Installation Instruction [Swivel Bracket] 1 2 Use the bolts to fix it on a concrete or wooden wall. To install, turn the product’s body as shown in the picture. (Use the bolts that are specifically made for the installation site) 3...
Page 4 User Guide P-Serie LED Area Flood Lighting Product Dimension (Wall Mount) Junction Box Dimension ...
Page 5 User Guide P-Serie LED Area Flood Lighting Installation Instruction [Wall Mount] 1 2 Use the screws (4 EA) to fix the junction box on a concrete or wooden wall. (Use the bolts that are specifically made for the installation site) Use a junction connector to wire the AC power cable.
Page 6 User Guide P-Serie LED Area Flood Lighting Replace (Driver & LED Module) Disassemble the cover & glass. Disassemble reflrector. ...
Page 7 User Guide P-Serie LED Area Flood Lighting Replace (Driver & LED Module) Disassembly LED module & driver. (Assembly is the reverse order of disassembly.) Diagram ...