Page 1
ALARKO BY COSA SMART THERMOSTAT INSTALLATION GUIDE OPERATION AND SETTINGS GUIDE...
Page 2
Top Button To view your Alarko by Cosa’s current settings or to switch between the Home, Sleep, Away, Custom or O mode, press top button to view the room temperature, then press the top button again to view the mode.
Page 3
DEVICE SETTINGS MENU After you’ve pressed the top button to view the current temperature, press the top button again for two seconds to access the device’s settings menu (1). If you see any of these alerts once you’ve accessed the settings menu, you will know that there is either a pairing error (2), an internet connection error (3) or that the batteries are low (4) After you’ve accessed the device’s settings menu, you can...
Page 4
* This will not appear If pairing does not if Alarko by Cosa is occur within a minute, USB powered Alarko by Cosa will exit this mode Press top button to Press top button to...
Need help?
Do you have a question about the ALARKO and is the answer not in the manual?
Questions and answers