Summary of Contents for Acronova Technology NB21 Series
- Page 1 Operation Manual Nimbie USB Plus Disc Autoloader Model #: NB21 Series (PC-Connected) Serial Number: ______________________________ (The serial number is labeled on the bottom of the device.)
-
Page 2: Preface
Notices: Reproduction, adaptation, or translation without prior written permission is prohibited. Trademarks: Acronova, Nimbie, Genii, Xymba, DupliQ, and Apus are the trademarks of Acronova Technology Inc. All other products, brands, and trademarks are the property of their respective owners. © 2012, Acronova Technology, Inc. - Page 3 Acronova Technology Inc. makes no warranty of any kind with respect to this information. Acronova Technology Inc. guarantees this device for a period of one year from the date of delivery, free from defects in material and workmanship.
- Page 4 In no event will Acronova Technology Inc. be liable for direct, indirect, special, incidental, tort, economic, contingent or consequential damages resulting from any defect in this product or its...
-
Page 5: Table Of Contents
Nimbie USB Plus Maintenance............23 Choosing Reliable Blank Discs............23 Disc Separation................23 Writing Speed................24 SuperSpeed USB 3.0 ..............24 Appendix B: Working with ImgBurn..........25 How to get Nimbie USB Plus working in ImgBurn.......25 How to check Nimbie USB Plus in ImgBurn........27 © 2012, Acronova Technology, Inc. -
Page 6: Specifications
3 kg; 6.5 lbs (varies upon configuration) Power: 100 to 240VAC; 50 or 60 Hz *Specifications are subject to change without notice. **To use Nimbie USB Plus at its MAXIMUM speed, a USB 3.0 compatible PC or Host Card is required. © 2012, Acronova Technology, Inc. -
Page 7: Unpacking Your Package
Once you have removed all the parts contained in your package, please check if any parts are missing or damaged. If any part is missing or damaged, contact your local dealer immediately. The items listed below should be included in the package: © 2012, Acronova Technology, Inc. - Page 8 Four Legs One Installation Disc (includes device driver and software) One Operation Manual Two Software Manuals *To use Nimbie USB Plus at its MAXIMUM speed, a USB 3.0 compatible PC or Host Card is required. © 2012, Acronova Technology, Inc.
-
Page 9: Getting Familiar With The Device
This bin serves as the storage container for receiving and stacking completed discs. As illustrated, a spindle box serves as a good Finish Disc Bin. Alignment Pad Use the pad to appropriately position the Finish Disc Bin under the Finish Disc Slot. © 2012, Acronova Technology, Inc. -
Page 10: Rear View
When turned on, it will enter initialization indicated by a flashing green ready light. When initialization is complete, the ready light will change to steady green. The table below describes the meanings of the LED indicators. © 2012, Acronova Technology, Inc. - Page 11 USB 2.0/Hi-speed connection established (disc-loader empty) USB connection NOT detected (discs in loader) USB connection NOT detected (disc-loader empty) Hardware error (no USB connection) Hardware error (USB 3.0/SuperSpeed connection) Hardware error (USB 2.0/Hi-speed connection) : Lit : Off : Flash © 2012, Acronova Technology, Inc.
-
Page 12: Installation
Inserting one leg after another on Nimbie’s base, match the leg to Nimbie and gently snap the leg into the receptacle until it is firmly attached. To remove the legs, gently press the notch and pull it outward from the receptacle. © 2012, Acronova Technology, Inc. -
Page 13: Nimbie Usb Plus Installation
The Windows will launch the installation application automatically. Note: For Windows Vista user, click Run SETUP.EXE on AutoPlay window to start installation. When the User Account Control screen pops up, click Continue. Click “Install Driver” and follow the instruction to install. © 2012, Acronova Technology, Inc. - Page 14 AutoPlay window to start installation. When the User Account Control screen pops up, click Continue. After the application software has been properly installed, software shortcuts shall appear on desktop. Remove the installation disc and keep it safe for future use. © 2012, Acronova Technology, Inc.
-
Page 15: Before Getting Started
Nimbie USB Plus processes discs in a First In, First Out (FIFO) sequence. During a job, you can gently add more disc , before the loader becomes empty. © 2012, Acronova Technology, Inc. -
Page 16: Rejected Discs
Use a suitable box to raise Nimbie USB Plus approximately 96 mm high to accommodate for the output of 100 discs. Use the alignment pad to appropriately position the Finish Disc Bin below the Finish Disc Slot. The Finish © 2012, Acronova Technology, Inc. -
Page 17: Nimbie Usb Plus Maintenance
In addition, we suggest users to test blank discs by using disc simulation before actually writing to discs. Important: As with blank discs, the quality and the data format of the master disc play a critical role in the duplication process. © 2012, Acronova Technology, Inc. -
Page 18: Disc Separation
However, it is strongly recommended that you separate or loosen blank discs from each other before use. © 2012, Acronova Technology, Inc. -
Page 19: Operation Quick Guide
Plus. Then, turn the power switch to the Off position. In case there is a session underway, abort or wait until it has completed. We recommend that you unplug the cord for safety when Nimbie USB Plus is not used for extended periods of time. © 2012, Acronova Technology, Inc. - Page 20 “Eject CD After Ripping” under “Rip Options”. More tutorials are available on Broadex Systems' website: http://www.broadexsystems.com/ Launch QQGetTray under OS X To Launch QQGetTray, click the icon in the application folder to bring up the following screen: © 2012, Acronova Technology, Inc.
- Page 21 Click this button to unload a disc from the autoloader. This function will be disabled if either the “START” or “START and LOAD” is activated. After “START” or “START LOAD” is activated, you can minimize the QQGetTray window. © 2012, Acronova Technology, Inc.
-
Page 22: Frequently Asked Questions
You can also turn the power switch to the Off position and back to the On position after waiting for 30 seconds. If this does not solve the problem, please contact your dealer or authorized service center. For more information, visit Acronova Knowledge Base on the website: http://www.acronova.com/kb/ © 2012, Acronova Technology, Inc. -
Page 23: Appendix A: Tips
However, it is strongly recommended that you separate or loosen blank discs from each other before use. © 2012, Acronova Technology, Inc. -
Page 24: Writing Speed
USB 3.0 interface is backward compatible with USB 2.0, however the transfer rate will be limited at USB 2.0. Mac hardware currently do not support USB 3.0, Nimbie USB Plus can only be used as a USB 2.0 device on Mac computers. © 2012, Acronova Technology, Inc. -
Page 25: Appendix B: Working With Imgburn
4. Launch ImgBurn burning software. 5. Click the “Tools” menu and select “Settings”. 6. Switch to the “I/O” tab, and enable the “Auto Loaders” option and “Acronova – BSRobots20.dll” option. Then click “OK” to finish the setting. © 2012, Acronova Technology, Inc. - Page 26 9. Now you can use ImgBurn with Nimbie USB Plus to unload discs after burnt, and load the next blank disc automatically. Reminder: Please pick up the RW that provided by Nimbie USB Plus as the destination in ImgBurn. © 2012, Acronova Technology, Inc.
-
Page 27: How To Check Nimbie Usb Plus In Imgburn
1. There is an “Auto Loader Control” function in ImgBurn and you can use it to test the Nimbie USB Plus. 2. You can click the “Tool” menu, and select “Changer” > “Auto Loader Control” to launch it. © 2012, Acronova Technology, Inc. - Page 28 Operation Manual, Nimbie USB Plus Version 1.2 Acronova Technology, Inc. http://www.acronova.com Manual Ver.: 1.2, February 2012 Part #: 711-NT21-9AC6-1 © 2012, Acronova Technology, Inc.
Need help?
Do you have a question about the NB21 Series and is the answer not in the manual?
Questions and answers