Sony RDR-VXD655 Operating Instructions Manual page 78

3
Press TIMER.
Timer – Standard
No Rec To Date
No.01
01 VHS 4/15
02 VHS 4/30
Media Date
03 --- --/--
VCR Today
04 --- --/--
05 --- --/--
06 --- --/--
1 2 3
4
Select an item using </, and adjust
using M/m.
A "Media": Select "VCR."
B "Date": Sets the date using M.
To record the same program every day or
the same day every week, press m.
The item changes as follows:
Today y Sun-Sat (Sunday to Saturday)
y Mon-Sat (Monday to Saturday) y
Mon-Fri (Monday to Friday) y Sun
(every Sunday) y Mon (every Monday)
y ... y Sat (every Saturday) y
1 month later y ... y Today
C "Start": Sets the start time.
D "End": Sets the stop time.
E "Ch": Selects the channel or input
source.
You can switch the broadcast using the
DIGITAL/ANALOG button.
F "Mode": Selects the recording mode;
"SP" or "EP." To use the Rec Mode
Adjust function (page 78), select
"AUTO."
If you make a mistake, select the item and
change the setting.
5
Press ENTER.
The Timer List menu (page 81) appears. The
c indicator lights up in the front panel
display, and the recorder is ready to start
recording.
• If the c indicator flashes in the front panel
display, check that a tape with its safety tab
in place is inserted.
• If timer settings overlap, a message appears.
To change or cancel a timer recording, select
"Edit" from the Timer List (page 81).
78
10:10 AM
Start End Source Mode Edit
09:00PM 10:00PM CH8
09:15PM 09:45PM CH11
Start End Ch Mode
--:-- --:-- ---- ---
:
09 : 00 10 00 Ch 8 SP
PM PM
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
4 5 6
6
Press SYSTEM MENU to turn off the menu.
There is no need to turn off the recorder before
the timer recording starts.
To stop recording
Press x STOP twice.
If timer settings overlap
The program that starts first has priority and the
second program starts recording only after the first
program has finished. If the programs start at the
same time, the program listed first in the menu has
priority. If the end time of one setting and the start
time of another timer setting is the same, the
beginning of the program that starts later will be
cut.
7:00 8:00
Program 1
Program 2
will be cut off
7:00 8:00
Program 1
Program 2
will be cut off
To change or cancel timer recording
See "Changing or Canceling VCR Timer Settings
(Timer List)" on page 81.
To use the Rec Mode Adjust function
If the remaining tape length is too short for the
current recording, the VCR automatically changes
the recording mode from SP to EP.
When setting the timer, select "AUTO" in
"Mode," and check that the "Tape Length" setting
is correct for the inserted tape ("VCR Function" -
"Tape Length" of "Features" in the "Setup"
display (page 102)).
9:00 10:00
9:00 10:00