Summary of Contents for Akai FH11AL
- Page 1 LCD Fan Heater with Remote Control INSTRUCTION MANUAL MODEL: FH11AL AFTER SALES SUPPORT (AU) 1300 886 649 (NZ) 0800 836 761...
-
Page 2: Table Of Contents
Contents Important Safety Instructions Product Overview Getting Started Operating Instructions Other Useful Information Warranty After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org... -
Page 3: Important Safety Instructions
Important Safety Instructions Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. - Page 4 Important Safety Instructions (Cont.) • After use: Always disconnect power when the heater is not in use and before cleaning, servicing or moving the heater. • Disconnect: To disconnect the heater, switch it off and remove the plug from outlet. When disconnecting, grip the plug, do not pull on the cord. •...
- Page 5 Important Safety Instructions (Cont.) • Children: Supervise children to ensure they do not play with the appliance. Close supervision is necessary when any appliance is used by or near children. • Do not touch during use: Do not touch the front grille during use as it will become very hot.
-
Page 6: Product Overview
Product Overview Front view Parts list Control panel Air outlet grille Base Safety switch (underneath the base, not visible here) Carrying handle Remote control (inside the storage compartment) Air inlet grille Power On/Off switch Back view After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org... - Page 7 Product Overview (Cont.) Control panel 13 14 Control panel buttons Display (see page 10 for details) 10 Oscillation On/Off button 11 “H” button: timer hour adjustment 12 “M” button: timer minute adjustment 13 Infrared receiver (for the remote control) 14 Control lamp 15 “-”...
-
Page 8: Getting Started
Getting Started Before first use • Unpack: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future. In the event it is to be disposed of, please recycle all packaging materials where possible. - Page 9 Getting Started (Cont.) Battery replacement If the battery in the remote control is empty, a new CR2032 (or equivalent) battery needs to be inserted. Follow the instructions below, as illustrated. • Push the locking tab to one side (A) and pull out the battery compartment (B).
-
Page 10: Operating Instructions
Operating Instructions Indicators on the display The selected setting is shown on the display: A - Swivel function is switched on B - Low heat output: appliance produces 1000W C - High heat output: appliance produces 2000W D - Timer function: appliance runs for the preset time E - Frost protection function display F - Room temperature display G - Preset target temperature display... - Page 11 Operating Instructions (Cont.) Setting the heating output • Activate the appliance by selecting the heat level. To do this, press the MODE/OFF Function button until the desired heat level is shown in the display: 1000W: Low heat output: appliance produces an output of 1000 watts 2000W: High heat output: appliance produces an output of 2000 watts •...
- Page 12 Operating Instructions (Cont.) Overheating protection The heater is fitted with an overheating protection which switches the appliance off automatically if it becomes too hot internally. As soon as the appliance has cooled down, the heating element switches itself back on. While this features provides additional safety in case of overheating, first and foremost you should make sure to eliminate all potential reasons that can lead to overheating and create a fire risk.
-
Page 13: Other Useful Information
Other Useful Information WARNING! Before attempting any maintenance or cleaning the heater, make sure it is switched off and disconnected from the power supply, and has sufficiently cooled down for safe handling. Troubleshooting If your heater fails to operate, or you experience any other problem with the appliance, check in the table below for solutions to common problems that may be solved without a service call. - Page 14 Other Useful Information (Cont.) WARNING! • Before attempting any maintenance or cleaning the heater, make sure it is switched off and disconnected from the power supply, and has sufficiently cooled down for safe handling. • Penetrating moisture can cause damage to the appliance. To avoid irreparable damage, ensure that no moisture penetrates the appliance during cleaning.
-
Page 15: Warranty
Warranty Should you, contrary to expectations, experience problems with your product due to workmanship or materials, this Warranty is given in addition to any rights you may have under Australian law including the Australian Consumer Law. Australian Consumer Law Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (Schedule 2 of the Competition and Consumer Act 2010 (Cth)). - Page 16 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on (AU) 1300 886 649 or (NZ) 0800 836 761 before returning it to the store for a refund.
Need help?
Do you have a question about the FH11AL and is the answer not in the manual?
Questions and answers