Step 3: Connecting The Video Cords/Hdmi Cords - Sony RDR-HX1010 Operating Instructions Manual

Step 3: Connecting the Video Cords/HDMI Cords

Select one of the following patterns A through E, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). This will enable you to view pictures.
A Connecting to a SCART input jack
When you set "Line1 Output" to "S Video" or "RGB" in "Easy Setup" (page 22), use a SCART cord that
conforms to the selected signal.
B Connecting to a video input jack
You will enjoy standard quality images.
C Connecting to an S VIDEO input jack
You will enjoy high quality images.
D Connecting to component video input jacks (Y, P
/C , P /C )
B B R R
You will enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, you must use this connection and set
"Component Out" in "Video" setup to "On" (page 88). Then press PROGRESSIVE on the remote to send
progressive video signals. For details, see "Using the PROGRESSIVE button" on page 16.
E Connecting to an HDMI input jack
Use a certified HDMI cord (not supplied) to enjoy high quality digital picture and sound through the
HDMI OUT jack.
14