Summary of Contents for North Slope Chillers NSC0250-FROST
Page 1
1. Power (ALWAYS check the Chiller Parameter tag and verify operational voltage before plugging in chiller) a. Only connect North Slope Chillers to a properly grounded circuit b. Never connect your North Slope Chiller to voltage that is outside the acceptable voltage range.
Model: NSC0250-FROST Owners Manual P a g e Specification sheet NSC0250-FROST Voltage Single Phase, 60hz, 110VAC Current 4.5 – 6.5 Amps Compressor Power .93HP (.68kW) Refrigeration Capacity 3000 BTU/hr (878 kW) @90F ambient and 45F fluid Refrigerant R-410a Refrigerant Charge .77 lbs...
Page 3
Model: NSC0250-FROST Owners Manual P a g e Chiller overview FRONT BACK www.northslopechillers.com | (866) 826-2993 | 3130 S 1030 W, Suite 1 | Salt Lake City, UT 84119...
Model: NSC0250-FROST Owners Manual P a g e Installation 1. Open package to check for damage and to verify that all components are there 2. Fill the reservoir 3. Connect inlet and outlet hoses 4. Plug in Power and turn on power switch 5.
Model: NSC0250-FROST Owners Manual P a g e Temperature control settings Temperature Control Panel LED Indicator Lights ON: System is running in intelligent control mode OFF: System is running in temperature control mode FLASHING: Controller is in parameter setting mode or displaying room temperature...
Model: NSC0250-FROST Owners Manual P a g e Advanced settings adjustment 1. Press and hold button then press and hold for 5 seconds until “0” is displayed 2. Press button to switch from 0 to 8 (default password) 3. Press to press enter after setting the correct password.
Model: NSC0250-FROST Owners Manual P a g e STANDARD PRODUCT WARRANTY 1. LIMITED WARRANTY POLICY Manufacturer warrants Ready to Ship products sold as “new” to be free from defects in material and workmanship under normal and proper use and servicing for a period of the shorter of one (1) year from the date of purchase by a retail customer.