Table of Contents
Advertisement
IMPORTANT INSTRUCTIONS
Important Information that may impact your
Manufacturer's Warranty
Adherence to the directions for use in this manual
is extremely important for health and safety. Failure
to strictly adhere to the requirements in this manual
may result in personal injury, property damage and
affect your ability to make a claim under the Electrolux
manufacturer's warranty provided with your product.
Products must be used, installed and operated in
accordance with this manual. You may not be able to
claim on the Electrolux manufacturer's warranty in the
event that your product fault is due to failure to adhere
to this manual.
BEFORE USING YOUR APPLIANCE
Before you use the appliance, we recommend that
you read through the relevant sections of this manual,
which provides the description of your appliance and
its functions.
To avoid the risks that are always present when you use
an appliance, it is important that the appliance is installed
correctly and that you read the safety instructions carefully
to avoid misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners.
This appliance complies with the requirements of
Australian Standards AS/NZS 60335.2.31
IMPORTANT
Check for any damage or marks. If you find the
appliance is damaged or marked, you must report
it within 7 days if you wish to claim for damage/
marks under the manufacturer's warranty. This
does not affect your statutory rights.
INFORMATION ON DISPOSAL
FOR USERS
ENVIRONMENT
Most of the packing materials are recyclable.
Please dispose of those materials through your
local recycling depot or by placing them in
appropriate collection containers.
If you wish to discard this appliance, please
contact your local authorities and ask for the
correct method of disposal.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
These warnings have been provided in the interest
of safety. You MUST read them carefully before
installing or using the appliance.
WARNING
The wire connection has to be done by specialized
technician.
•
The manufacturer will not be held liable for
any damages resulting from incorrect or
improper installation.
•
The minimum safety distance between the cooker
top and the extractor hood is: for electrical hob
600mm and for gas hob 650mm.
•
If the instructions for installation for the gas hob
specify a greater distance, this must be respected.
•
Check that the mains voltage corresponds to that
indicated on the rating plate fixed to the inside of
the hood.
•
Means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
CAUTION
In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance
must not be supplied through an external
switching device, such as a timer, or connected
to a circuit that is regularly switched on and off
by the utility.
•
For Class I appliances, check that the domestic
power supply guarantees adequate earthing.
•
Connect the extractor to the exhaust flue through a
pipe of minimum diameter 120 mm. The route of the
flue must be as short as possible.
•
If the extractor is used in conjunction with non-
electrical appliances (e.g. gas burning appliances), a
sufficient degree of aeration must be guaranteed in
the room in order to prevent the backflow of exhaust
gas. When the cooker hood is used in conjunction
with appliances supplied with energy other than
electric, the negative pressure in the room must not
exceed 0,04 mbar to prevent fumes being drawn
back into the room by the cooker hood.
•
The air must not be discharged into a flue that is used
for exhausting fumes from appliances burning gas or
other fuels.
•
If the supply cord is damaged, it must be replaced
from the manufacturer or its service agent.
3
Hide quick links:
Advertisement
Table of Contents
