Sony MZ-G750DPC Operating Instructions Manual page 25

Difference
Recorded track
numbers
Recorded sound
level
Digital (optical)
input
Marked (copied)
automatically
• at the same positions
as the source (when
the sound source is a
CD or an MD).
• after more than 2
seconds of blank or
low-level segment
(with a sound source
other than CD or
MD).
• when the recorder is
paused during
synchro-recording
(the recorder pauses
automatically when it
encounters a section
with no audio signal
for 3 seconds or
more).
You can erase
unnecessary marks
after recording.
("Erasing a track
mark", page 53).
Same as the source.
Can also be adjusted
manually (Digital REC
level control)
("Adjusting the
recording level
manually
(Manual recording)",
page 33).
Analog (line) input
Marked automatically
• after more than 2
seconds of blank or
low-level segment.
• when the recorder is
paused while
recording.
You can erase
unnecessary marks after
recording ("Erasing a
track mark", page 53).
Adjusted automatically.
Can also be adjusted
manually ("Adjusting
the recording level
manually
(Manual recording)",
page 33).
25