Sony SLV-D380P Operating Instructions Manual page 83

4
• Scan and Play (To search using the index
1
2
• Go to [0:00:00] (To search for the counter
Press V.
The VCR starts searching and automatically
stops at the 0:00:00 point.
To mark a point on the tape that you want to
find later, press CLEAR to reset the tape
counter to "0:00:00."
• End search (To search for a blank portion of
Press v.
The VCR starts searching and automatically
stops at the beginning of a blank space. If no
blank space is found, the VCR reaches the end.
To stop searching
Press x STOP.
Note
• Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
function):
Press b to scan ahead, or B to scan
backwards.
The VCR searches and then plays back for
about five seconds.
Press H PLAY to view the program.
If you do not press H PLAY, the VCR
automatically searches for the next index
mark, or until it reaches the end of the tape.
0:00:00 point):
the tape)
Searching using various functions
US
83