Summary of Contents for Cambridge SoundWorks OontZ Angle 3 BudZ
Page 2
Pairing & Connecting to your Mobile Device Play Controls To Hear the Best Sound and Best Bass from your OontZ Angle 3 BudZ Select the Best Fitting In-Ear OontZ Angle 3 BudZ Comfort Fit with Iso-Fit Cushions Wearing your OontZ Angle 3 BudZ Under-Ear...
In the Package OontZ Angle 3 BudZ Headphones Quick Start Guide 3 - pairs of in-ear earphones 1 - USB Micro Charging Cable Large | Small |mini iso-Fit Cushions...
Left Right In-ear earphones Backside of Inline Controls Rubber Flap Covers Micro USB LED Indicator Charging Port Light Note: When you wear the OontZ Angle 3 BudZ headset, note that the side with the control button is to the right.
Up to 8 hours on a full charge, with volume at 60%. Louder volume will reduce play time. Automatic Turn Off The OontZ Angle 3 BudZ will turn off 15 minutes after being disconnected Step 2: Insert the smaller end of from your mobile device.
Turning On and Off Turn ON Press and Hold Down button for 2 Seconds Voice prompt: “Hello” LED Indicator Light will turn on Flashing Blue rapidly indicates OontZ is in pairing mode Angle 3 BudZ Flashing Blue 3 times every 5 seconds indicates OontZ is connected to a Angle 3 BudZ...
Pairing & Connecting to your mobile device - Your mobile device needs to be within 30 unobstructed feet of the OontZ Angle 3 BudZ - Make sure your OontZ Angle 3 BudZ battery has a sufficient charge Turn ON your OontZ Angle 3 BudZ The LED Indicator Light will turn on If the blue light is rapidly flashing...
Page 8
- Select ‘OontZ Angle 3 BudZ ’ when it appears under OTHER DEVICES - The OontZ Angle 3 BudZ will connect in a few seconds - The LED Light on your OontZ Angle 3 BudZ will flash BLUE 3 times every 5 seconds and you are ready to play To pair and connect from a Smartphone or Tablet: - Go to Settings >...
Play Controls Volume Up Track Advance Press and Release Press and Hold Down for 2 Seconds Play Pause Press and Release Volume Down Track Back Press and Release Press and Hold Down for 2 Seconds Repeat to go to Previous Track...
Page 10
Angle 3 BudZ to learn if they are snug and comfortable. If they do not feel snug try the large In-Ear OontZ Angle 3 BudZ, and if the medium are too tight try the small In-Ear OontZ Angle 3 BudZ.
Step 2: Slide the In-Ear OontZ Angle 3 BudZ onto the earbud shaft In-Ear OontZ Angle 3 BudZ Side view Step 3: Your OontZ Angle 3 BudZ are now ready to insert into your ear...
Page 12
Wearing your OontZ Angle 3 BudZ Under-Ear Install the Right (R) Iso-Fit Cushion onto the Right (R) earbud, with the holes lined up as shown. Insert the Right earbud into your right ear canal. The Iso-Fit Cushion should fit comfortably and snugly in your ear, allowing for the best sound quality.
Page 13
Wearing your OontZ Angle 3 BudZ Over-Ear For an even more secure fit during rigorous activity you can wear your OontZ Angle 3 BudZ Over-Ear, putting your Left earbud in your right ear and your Right earbud in your left ear. The inline controls will then be on your left side.
Phone Call Controls Reject Call or Transfer Call Between OontZ Angle 3 BudZ & Smartphone Press and Hold Down for 2 Seconds Answer Incoming Call Last Number Redial or End Call Press and Release Twice Press and Release Call Mute Press and Hold Down for 2 Seconds...
OontZ Angle 3 BudZ will not turn on • The battery may have become fully drained. Charge the OontZ Angle 3 BudZ using a USB wall charger from a Smartphone/iPhone or tablet for at least 15 minutes, then press button to turn the OontZ Angle 3 BudZ on.
Page 16
Turn off the OontZ Angle 3 BudZ , go to the Bluetooth device list on your iPhone, iPad or iPod and check if the OontZ Angle 3 BudZ is listed. If it listed press the icon next to the OontZ Angle 3 BudZ and then forget this device, twice. With the OontZ Angle 3...
• Some mobile devices need to have their WIFI turned off to improve audio quality over Bluetooth. • It may be that you need to re-pair the OontZ Angle 3 BudZ with your mobile device. Remove it from your paired devices list, restart the mobile device and then follow the steps to re-pair the headphones.