Headlamp Adjustment; Replacing Bulbs - Mercedes-Benz 560 SL 107 1988 Owner's Manual

Headlamp Adjustment

Correct headlamp adjustment is ex­
tremely important. Check and read­
just headlamps at regular intervals
and when a lamp has been
replaced.

Replacing Bulbs

Handle new Halogen type bulbs
only with tissue paper or similar.
Install only 12 volt bulbs with the
specified watt rating.
78
Front Lamps
1 Cover
2 Securing screws for cover
3 Horizontal adjusting screws
4 Vertical adjusting screws
5 High and low beam sealed-
beam unit (Halogen) No. 2:
Loosen clamping screws (8),
remove retaining ring and lamp,
disconnect plug from socket on
lamp.
6 High beam sealed-beam unit
(Halogen) No. 1:
Loosen clamping screws (9),
remove retaining ring and lamp,
disconnect plug from socket on
lamp.
7 Side marker lamp (4 W/2 cp
bulb):
Remove headlamp (5), loosen
clamping screw (10) and detach
lamp holder. Depress bulb, turn
left and pull out.