Summary of Contents for Fo-Link F-501 FTTX New PON
- Page 1 PON Optical Power Meter Notice Trademarks All trademarks mentioned in this manual are registered property of our. Explanation The content of this manual is subject to our explanation.
-
Page 2: Table Of Contents
PON Optical Power Meter Catalog ....................3 ECTION VERVIEW Ⅱ Ⅱ Ⅱ Ⅱ S ..................4 ECTION PECIFICATIONS Ⅲ Ⅲ Ⅲ Ⅲ S .................5 ECTION TANDARD ACKAGES Ⅳ Ⅳ Ⅳ Ⅳ P ...............5 ECTION ANEL AND UNCTIONS Ⅴ Ⅴ Ⅴ Ⅴ O ..................12 ECTION PERATION... -
Page 3: Sectioni Overview
PON Optical Power Meter Section I Overview PON optical power meter is designed for designation, operation and maintenance of FTTX network. It is able to concurrently measure the optical power values of voice, data and video signals. It is an ideal choice for the construction and maintenance of FTTX network works. -
Page 4: Ⅱ Ⅱ Ⅱ Ⅱ Specifications
PON Optical Power Meter connector ends, bending, broken optical fiber, any of such problems may produce signal loss or decrease transfer performance. Section Ⅱ Ⅱ Ⅱ Ⅱ Specifications 1550 1310 upstream 1490 downstream Calibrating wave length downstream measurement measurement measurement Spectral passband (nm) 1260～1360 1470～1505... -
Page 5: Ⅲ Ⅲ Ⅲ Ⅲ Standard Packages
PON Optical Power Meter Input voltage Rechargeable battery 2 AA2.4V AC adapter Type of optical fibre Single mode optical fiber Working temperature -10～60℃ Storage temperature -25～70℃ Dimensions (cm) 16.5×8.0×3.5cm Ⅲ Ⅲ Ⅲ Ⅲ Section Standard Packages PON optical power meter 1 set User Guide 1 copy... - Page 6 PON Optical Power Meter O N T ( 1 3 1 0 n m ) OLT/VIDEO(1490/1 connector 550)nm connector B a t t e r y p o w e r d i s p l a y USB data cable Auto power off Power ON/OFF...
- Page 7 PON Optical Power Meter Press to power on the device, the following screen will appear： There are the measurement results of three wavelength appearing on the screen, i.e.: 1310nm upstream test and 1490nm/1550nm downstream test. The measurement value will appear when there is light passing through the optical channel,otherwise “LOW”...
- Page 8 PON Optical Power Meter Set threshold value 4.2.3 Press“ ” While in main interface，the following feature set: Relative value measurement According to the test requirements, choose to display different wavelengths and reference values, relative power value = absolute power value - reference value. press“...
- Page 9 PON Optical Power Meter Threshold of 10 groups chosen to provide, with three lights on the keypad to use. ① ② Each light has three states: green, testing equipment for normal yellow, can be ③ used but problems; red, testing equipment for an exception Press 1db increase or decrease the threshold.
- Page 10 PON Optical Power Meter -10- Time set Set the current time, shown as year - month - day - time – minute. Press“ ”change year, then press“ ”change month, followed by modification date, time and minutes，after setting minutes and then press“ ”save time setting and exit。Use“...
- Page 11 PON Optical Power Meter -11- press“ ”exit. As above，Matt Way detection 1310nm, 1490nm display-40dBm, 1550nm display-40dBm, when the display light to enter the corresponding test value. Thresh Sel 5 show that the selection of the fifth set threshold. Time is at 15:45 on June 2nd, 2009.0001/0002 data, 0001 is the current view of the data serial number, 0002 is the instrument in the total number of historical data。use“...
-
Page 12: Ection Peration
PON Optical Power Meter -12- press“ ”to delete, “ ”to cancel. Press“ ”to delete, display the "Delete ..." that is being deleted, delete the automatically disappear. Ⅴ Ⅴ Ⅴ Ⅴ Section Operation 5.1Press“ ” to power on the device into the PON testing interface. press“... - Page 13 PON Optical Power Meter -13- Use“ ”into selected threshold option, press“ ”. Use“ ” select the desired threshold. for example, select the threshold value of the name test 1 as the first threshold group, press“ ” the change will take effect. Press“...
- Page 14 PON Optical Power Meter -14- Note that the measured fiber connector type, connector type does not match the access instrument, which may damage the instrument's output optical head, and get an incorrect measurement results. It supports measurement of three wavelength i.e.: 1310nm upstream, 1490nm and 1550nm downstream at the same time.
- Page 15 PON Optical Power Meter -15- screen, the power value for 1310nm is displayed in yellow, if the power value falls outside of threshold value, >+3dBm or <-30dBm, it means that there exists abnormal in optical circuit, the power value of the optical circuit is too strong or too weak, so in the testing screen, the power value for 1310nm is displayed in red.
-
Page 16: Section Ⅵ Ⅵ Ⅵ Ⅵ Troubleshooting
PON Optical Power Meter -16- Section Ⅵ Ⅵ Ⅵ Ⅵ Troubleshooting Fault performance Possible causes Solution 1.Power is not turned on. No LCD display. 1.press“ ” open Or can not boot 2.Power .isn’t enough 2.Replace the batteries 1.Power isn’t enough. 1.Replace the batteries. -
Page 17: Section Ⅷ Ⅷ Ⅷ Ⅷ Warranties And Servicing
PON Optical Power Meter -17- 7.2 Use only one adapter if possible. 7.3 If you are not going to use the tester for the time, cover the dust-proof cap immediately to keep the end clean. Long-time exposure in air may gather dust therefore influencing measurement accuracy. - Page 18 PON Optical Power Meter -18- manufacturer 2. The problem or fault arising of improper use, negligence or incidence Warranty Registration The product is accompanied by a Warranty Registration Card, please complete it and send it back to us together with a photocopy of the invoice, they will be used as the voucher for any maintenance, technical update or calibration that we may make in the future.
- Page 19 PON Optical Power Meter -19- Product Warranty Card Product Type: Product Serial Number: Date: User Name: TEL: FAX: Address: Zip Code: E—mail: Seal: (Please keep this together, cut the second line and on this basis, send.) ---------------------------------------------------------------------------------- (Please cut along the dotted line and return the company.) Product Type: Product Serial Number:...