Advertisement
• Check all the parts of the CONCORD SLIDER, and the
accessories used, at regular intervals.
• Never use accessories that have not been approved by
CONCORD.
• Only replacement parts supplied or recommended by CONCORD
shall be used.
• The guarantee does not apply if the CONCORD SLIDER is
damaged through excess strain, incorrect usage or the use of
other spare parts / accessories.
• Throw away all plastic packaging immediately. It can put your
child's life at risk.
Non-compliance with the instructions in this manual may affect the
safety of your child!
_ CLEANING AND MAINTENANCE
To prevent corrosion, always keep the metal parts of the CONCORD SLIDER
clean and dry. Use silicone spray to regularly lubricate the moving parts.
Do not use oil or grease.
Only clean parts made from synthetic materials using lukewarm water and a
mild cleaning agent. Coarse contamination can be brushed off when dry.
12
_ INSTALLING THE CONCORD SLIDER
The CONCORD SLIDER must only be attached using the receptacle
provided in the centre of the CONCORD NEO. Installation at another position
or manner is not permitted.
From the rear, place the adapter (01) on the base (02) of the receptacle on
the CONCORD NEO and press the CONCORD SLIDER forwards until it
engages, audibly and visibly detectable.
The unlocking buttons of the adapter (01)
must audibly engage are disengage.
Before each journey, check to make
sure that installation has been
carried out correctly, the locking
mechanism is closed and that
the central hinge (05) is
locked.
13
Advertisement
