Step 3: Connecting The Video Cords - Sony DVP-NS32 Operating Instructions Manual

Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through D, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
(For DVP-NS52P only) In order to view progressive signal (525p or 625p) pictures with a
compatible TV, projector, or monitor, you must use pattern A.
C
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
to COMPONENT
VIDEO OUT*
(green)
COMPONENT
VIDEO IN
(green)
P
B
(blue)
P
R
(red)
TV, projector, or AV
amplifier (receiver)
l : Signal flow
* DVP-NS52P only
Note
When connecting to a progressive TV, it is recommended that you use only pattern A. If you connect to your
TV using both A and B, a special control signal transmitted via the SCART cable may cause the signal to
be switched to the SCART jack.
16
(yellow)
Audio/video
cord (not supplied)
to LINE OUT (VIDEO)
COAXIAL
R AUDIO L
OPTICAL Y P /C P /C
B B R R
DIGITAL OUT COMPONENT VIDEO OUT
(blue) (red)
Y
/C
B
/C
R
A
S VIDEO cord
(not supplied)
(yellow)
to S VIDEO OUT*
LINE OUT
LINE L C E N T E R
VIDEO
(RGB)
-TV
S VIDEO OUT
to LINE
(RGB)-TV
Component video
cord (not supplied)
INPUT
S VIDEO
TV, projector, or AV
amplifier (receiver)
CD/DVD player
SCART cord
(not supplied)
TV
D
B