Sony DVP-NS315 Marketing Operating Instructions Manual page 22

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
B-2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(DVP-NS415 only)
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
Recommended surround sound effects for
the connection only
B-1
• TVS STANDARD (page 45)
z Hint
In connection B-1
audio/video cord instead of using a separate audio
cord.
22
CD/DVD player
DIGITAL OUT LINE COMPONENT
Y
VIDEO OUT
PCM/DTS/ IN R-AUDIO-L VIDEO
S VIDEO
DOLBY DIGITAL
OUT
P
COAXIAL OPTICAL B
P
R
OUT R-AUDIO-L VIDEO
Coaxial digital
cord (not supplied)
or
Stereo amplifier (receiver)
, you can use the supplied
Stereo audio cord
(not supplied)
(white)
or
(white) (red)
to audio input
MD deck/DAT deck
Note
If you select one of the TVS effects (page 44) while
playing a disc, no sound will come from your
speakers with the
. If the amplifier
B-1
LINE
IN R-AUDIO-L
(red)
OUT R-AUDIO-L
to LINE OUT L/R (AUDIO)
connection.
B-2
.
B-2
B-1
VIDEO
VIDEO