Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for ALDI AU4-PE-3A
- Page 1 Pedometer with Speed Sensor User Manual...
-
Page 2: Table Of Contents
MODEL NO. AU4-PE-3A/3B Importer Krippl-Watches Warenhandels GmbH, Maria-Theresia-Str. 41, A-4600 Wels, Austria PRODUCT COMPONENTS / SCOPE OF DELIVERY 1 pedometer AU4-PE-3A/B (Type: PDD-VB) 1 clip 1 x 3 V battery type CR2032, already inserted User manual Warranty card TABLE OF CONTENTS GENERAL INFORMATION................ -
Page 3: General Information
Pedometer with Speed Sensor General Information OPERATION MODES ..................8 Main Mode ....................8 Exercise Mode..................8 Daily Record Mode ................10 Memory Mode ..................10 TECHNICAL DATA ..................12 BATTERY CHANGE ..................12 CONFORMITY ....................13 TROUBLESHOOTING/FAQS ................ 14 CONTACT DATA ................... -
Page 4: Operational Environment Conditions
Pedometer with Speed Sensor Safety and Servicing • Remove the battery when the device is not in use for a longer period of time. • Caution! There is a risk of explosion, if the battery is not changed correctly. Only replace the battery with one of the same or similar type. -
Page 5: Notes On Operating Instructions
Pedometer with Speed Sensor Function Keys/Modes/Setting Notes on operating instructions We have structured the operating instructions for this pedometer in such a way that you can always find the information you require using the themed topics in the table of contents. Additionally, you can refer to the FAQ section on our online product service page for further help with your pedometer. -
Page 6: Pedometer Calibration
Pedometer with Speed Sensor Function Keys/Modes/Setting Set Time Press SEL to toggle 12 or 24 hr Format, press SET to confirm and advance to SET hours. Press SEL to advance to desired hours, press SET to confirm and advance to set minutes. Press SEL to advance to desired minutes, press SET to confirm and advance to set weight. - Page 7 Pedometer with Speed Sensor Function Keys/Modes/Setting • The display shows “CALI” and “Walk” is flashing. Press SET again to confirm the calibration for running and enter calibration for walking. Repeat above process for walking. Calibration not successful In case the calibration was not successful, the display “FAIL” appears. After a few seconds the display “CALI”...
-
Page 8: Operation Modes
Pedometer with Speed Sensor Operation Modes OPERATION MODES The unit has 4 operation modes: Main, Exercise, Record and Memory. Scroll through the operation modes by pressing the MODE key. Main Mode By pressing the SEL key in the main mode, you can see current information of STEP in upper display and sub information in lower display as below: •... - Page 9 Pedometer with Speed Sensor Operation Modes 4.2.1 Target Zone User can select one of the following targets for his own daily workout target Distance, Speed, Step and Timer. The unit default is Target Step. If user desire other workout data, please hold SET key in Exercise Mode until “SET”...
-
Page 10: Daily Record Mode
Pedometer with Speed Sensor Operation Modes 4.2.3 Activate/Deactivate Target Alert Hold SEL key in exercise mode pressed for 3 seconds to activate/deactivate target alert in exercise mode. Alert symbol is displayed = alert on Alert symbol not displayed = alert off 4.2.4 Stopwatch Mode In exercise mode the user can change to Stopwatch mode by pressing SEL key. - Page 11 Pedometer with Speed Sensor Operation Modes Memory Mode display sequence (part A) Memory Mode display sequence (part B) Odometer Save Function Before changing battery or perform a TOTAL RESET, please write down the accumulated distance travelled and use this function to input distance back to the pedometer.
-
Page 12: Technical Data
Pedometer with Speed Sensor Technical data Note: 1. ODO can only be reset to zero by TOTAL RESET or battery changing. 2. To avoid ODO info lost by battery changing, user can re-enter the value in “Set Odometer” session above. It is not possible to switch off the pedometer. -
Page 13: Conformity
Pedometer with Speed Sensor Conformity • Place the back cover back onto the battery compartment. • Start pedometer described point “Function Keys/Modes/Settings”. If irregular symbols appear in the display, please remove the battery again and reinsert it. This will reset the microprocessor. After it, the pedometer should function normally again. -
Page 14: Troubleshooting/Faqs
Pedometer with Speed Sensor Troubleshooting/FAQs TROUBLESHOOTING/FAQS Before submitting a claim about the pedometer, please check the battery and change it if required. How to make a claim: Please inform us about the article number of the product and the reason of the claim (email). Additionally, you can refer to the FAQ section on our online product service page for further help with your pedometer.