Sony DVP-CX995V Operating Instructions (DVP-CX995V CD/DVD Player) Operating Instructions Manual page 29

19
Press ENTER.
"SUBWOOFER" is selected.
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
To set, press
To quit press
SETUP DISPLAY DISPLAY
20
Press X/x to select whether or not
you have connected a subwoofer.
21
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 ( through
B D
default setting and does not need to be
adjusted when you first connect the player.
See page 76 for using the Setup Display.
Audio connection (pages 21 to 24)
A
• No additional settings are needed.
C-1
B-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 81).
B-2 C-2 D-2 D-3
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 81).
• Set "DIGITAL OUT" to "ON" (page 81).
D-1
• Set "DISTANCE" and "LEVEL" according
to the connected speakers (page 84).
OFF
LARGE
LARGE
LARGE
YES
YES
, then ENTER ENTER .
NONE
). Each of these is the
z Hints
• For connections
B-1
If the sound distorts even when the volume is
turned down, set "AUDIO ATT" to "ON"
(page 81).
• For connections B-2
Set "48 kHz/96 kHz PCM" to "96 kHZ/24 bit"
only if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 82).
C-1 D-1
C-2 D-2 D-3
29