Ntpsyshostmode - TrueTime IRIG NTS-100 Manual

ntpSysHostMode

SYNTAX
ACCESS
STATUS
7.6.9 The value of this variable indicates the mode that the host is operating in. Note: This is
the value of the time server's outgoing NTP packet mode field.
::= { ntp 8 }
ntpSysStratum OBJECT-TYPE
SYNTAX
ACCESS
STATUS
7.6.10 This is an integer that ranges from 1 to 255 indicating the stratum level of the local clock.
Note: A primary time server sets outgoing NTP packets stratum field and ntpSysStratum
to 1.
::= { ntp 9 }
ntpSysPoll OBJECT-TYPE
SYNTAX
ACCESS
STATUS
7.6.11 When the time server is in NTP broadcast mode, this is an integer indicating the
maximum interval between successive NTP messages, in seconds to the nearest power
of two. For example a value of 6 means 2^6 or 64 seconds. Note: A primary time
server's outgoing NTP packet will have its poll field set to ntpSysPoll. Note: This field is
equal to 0 when not in NTP broadcast mode. Note, unless this is a time server initiated
NTP packet the value of the poll equals the value set in the in coming packet.
::= { ntp 10 }
N T S - 2 0 1 . M A N
N T S - 2 0 1 . M A N
INTEGER {
reserved (0),
symmetric active (1),
symmetric passive (2),
client (3),
server (4),
broadcast (5),
reserved (6),
reserved (7)
}
read-write
mandatory
INTEGER {
unspecified (0),
primary reference (1),
secondary reference (2..255)
}
read-only
mandatory
INTEGER { (6..10) }
read-write
mandatory
7 - 8
7 - 8
1/20/97
R e v . A
R e v . A