Page 1
Notice for use Kit Contents Thank you for choosing No-Match! In order to use this device correctly please ensure you read all the instructions contained in this Manual before use or charging. For more information you can visit our website...
Product Introduction Product Assembly Unscrew the bottom Fill with e-liquid Screw back together (avoid centre hole) Filling aperature ~2.5mm Adjustable Air Drip Tip Tube Body Vaping Button Flow Control Connect the atomiser Press button to vape Coil...
Page 3
Operation (a) Operation (b) Place in LiPo Bag You can start vaping once charging is complete. Press and hold the vaping button whilst you inhale. whilst charging Charge via the No-Match USB Adapter (Available separately)
Page 4
The light will illuminate blue (voltage ≥3.8v), Purple (Voltage Charging indication: Connect the ATOM battery to a No-Match 5V 1A 3.5v - 3.8v) or red (Voltage <3.5v) Release the button and the indicator lights will turn o .
Page 5
0.6 , 1.0 ( spare included coil ) (0.3 available separately) Charge inside LiPo Charging Bag and use a Capacity: <2.0ml No-Match Mains-USB 5V 1A charger (not supplied) or a suitable computer USB Construction: 100% USA made Kanthal wire, 304 stainless steel + port.
Page 6
2 minutes after lling with e-liquid. This will let the coil soak up the liquid. Only for use with a No-Match Charger. Use of unauthorised chargers may lead Failure to do this can burn the coil out quicker, and/or produce a burning taste.
Page 7
Do not keep in a pocket, handbag or similar with loose change or keys. Do not overtighten the battery to the atomiser. No-Match can not be held responsible for any damage caused by misuse, Do not use a charger with frayed or damaged wires.