Storage location of the manual ..................6 Accident Prevention Regulations ................... 6 Additional information..................... 6 Target group........................7 Explanation of symbols ....................8 Wacker Neuson Contact partner..................9 Limitation of liability ......................9 Product identification of the machine ................10 Safety ........................11 Policy..........................11 Application in accordance with the intended purpose ..........
Page 4
Components and operator's controls ..............21 Transport ......................... 22 Loading and transporting the machine ................. 22 Storage ........................23 Operation ......................... 24 Before commissioning ....................24 9.1.1 Control procedures before commissioning ............24 Commission........................25 Operation........................26 Decommissioning ......................26 Maintenance ......................
This operator's manual is not a manual for extensive maintenance or repair work. Such work must be carried out by the Wacker Neuson service department or by certified technically trained personnel.
The information contained in this manual is based on machines that were man- ufactured at the time of printing. Wacker Neuson reserves the right to make un- announced modifications to this information. It must be ensured that possible modifications or supplements on the part of the manufacturer are introduced in this manual immediately.
2 Introduction Target group Note: People who work with this machine must be trained regularly regarding the dangers of handling the machine. This operator's manual is intended for the following people: Operating personnel: These people are instructed in the machine and are informed of possible dan- gers in the event of improper behavior.
2 Introduction Explanation of symbols This manual contains particularly emphasized safety instructions in the catego- ries: DANGER, WARNING, CAUTION and NOTE. Before all work on and with this machine, the notes and safety instructions must have been read and understood. All notes and safety instructions in this manual must also be passed on to the maintenance, repair and transport personnel.
2 Introduction Wacker Neuson Contact partner Depending on your country, your Wacker Neuson contact partner is Wacker Neuson service, a Wacker Neuson affiliate or a Wacker Neuson dealer. On the Internet under www.wackerneuson.com. The manufacturer's address is found at the beginning of this manual.
2 Introduction Product identification of the machine Data of the nameplate The nameplate contains information that uniquely identifies this machine. This information is required for ordering spare parts and when inquiring about techni- cal issues. Enter the information about the machine in the following table: ...
The machine may only be combined and operated with permissible components. The machine may only be operated with the accepted rechargeable battery from Wacker Neuson. Application in accordance with the intended purpose also includes the observa- tion of all notes and safety instructions in this manual as well as complying with the prescribed care and maintenance instructions.
The following in particular are considered structural changes: Opening the machine and a permanent removal of elements. Installation of spare parts that do not originate from Wacker Neuson or are not comparable in the design system and quality of the original parts.
3 Safety Personnel qualification This machine may only be operated and used by trained personnel. In the event of misuse, misapplication or operation by untrained personnel, dan- gers threaten the health of the user or third parties and damage to or the com- plete failure of the machine also threatens.
External influences Only use the battery charger indoors and keep away from rain and moisture. 3.9.2 Operational safety Only charge approved rechargeable batteries from Wacker Neuson. Damaged battery chargers may not be used. Damaged rechargeable batteries may not be recharged.
3 Safety 3.10 Electrical safety The connector plug of the battery charger must fit in the plug receptacle. The connector plug may not be modified in any way. Do not use the adapter plug together with grounded machines. Unmodified plugs and plug receptacles re- duce the risk of an electric shock.
The penetration of water into the battery charger increases the risk of an elec- tric shock. Only charge approved rechargeable batteries from Wacker Neuson. The battery charger may not be exposed to heat or fire. Storage in direct sun- ...
Adhere to maintenance intervals. Observe the maintenance schedule. Non-listed work must be taken over by the service department of the Wacker Neuson contact partner. Immediately replace worn or damaged machine parts. Only use spare parts from Wacker Neuson.
3 Safety 3.14 Behavior in dangerous situations Preventative measures: Always be prepared for accidents. Keep first-aid equipment on hand. Make personnel familiarized with accident reporting, first aid and rescue fa- cilities. Keep access routes clear for rescue vehicles. ...
5 Setup and function Setup and function Application area The battery charger is used to charge the Wacker Neuson rechargeable battery. Brief description This machine is a battery charger for the efficient and quick charging of recharge- able batteries. The battery charger essentially consists of a charging system, fan, charging plug and a power cable.
7 Transport Transport WARNING Improper handling can lead to injuries or serious material damage. Read and observe all safety instructions in this operator's manual. Loading and transporting the machine Perform preparations Item Designation Item Designation Battery charger Power cable (not visible) Power cable / plug When loading and transporting, the cable of the battery charger must be ...
8 Storage Load and lash down the machine Item Designation Item Designation Battery charger Carrying handle 1. Lift the machine by the carrying handle. 2. Carefully load the machine into or onto a stable means of transport capable of bearing the load. 3.
Control procedures before commissioning Check the machine and components for damage. In the event of visible dam- age, do not operate the machine and immediately contact a Wacker Neuson dealer. Ensure that loose packaging material has been removed from the machine.
9 Operation Commission Note: Only use rechargeable batteries from Wacker Neuson. Item Designation Item Designation Rechargeable battery (optional) Power cable / plug 1. Place the battery charger on a dry and clean working area. 2. Place the rechargeable battery in the battery charger. Ensure the proper con- nections! 3.
9 Operation Note: Battery charger: Note the LEDs: all LEDs illuminate briefly until the oper- ation indicator (blue LED) illuminates. Rechargeable battery: Note the LED light progress bar. The LEDs indi- cate the current charge situation of battery. 6. Check the charge situation of battery regularly. Operation Regularly check the charge situation of rechargeable battery during operation.
10 Maintenance 10 Maintenance WARNING Improper handling can lead to injuries or serious material damage. Read and observe all safety instructions in this manual. WARNING Electrical voltage Risk of injury from electric shock. Switch the machine off. 10.1 Maintenance table Maintenance jobs Daily...
Page 28
Penetrating moisture can lead to a total failure. 1. Check for damage after cleaning. 2. Check the cable, plug and fan to ensure they are in a flawless condition. Note: If the battery charger is damaged, contact the service department of the Wacker Neuson contact partner. 100_0201_mt_0003.fm...
Connector plug is not proper- Properly connect the con- charge. ly connected. nector plug. Power cable not connected Insert power cable in power to a power source. source. Defective rechargeable bat- Contact a Wacker Neuson tery. contact partner. Defective battery charger. 100_0201_ts_0003.fm...
- Allow the equipment to cool down if necessary. - Put machine back into operation and acknowledge error by using a touch button. Maintenance The rechargeable bat- LED illuminates. tery was disabled due to a fault. Wacker Neuson *Contact a contact partner. 100_0201_ts_0003.fm...
12 Disposal 12 Disposal 12.1 Disposal of old electrical and electronic equipment For customers in EU countries This equipment is subject to the European directive for old electrical and elec- tronic equipment (Waste Electrical and Electronic Equipment - WEEE) as well as the corresponding national laws.
13 Technical data 13 Technical data Designation C 48/13 Item number 5100002543 Rated voltage 230 (85 – 270) Kind of current (input) Rated current 3.10 Rated frequency 50 – 60 Rated power 0.65 Kind of current (output) Output current 13.5 Output voltage 57.6...
Data about the model designation and voltage of this machine is located on the nameplate. The necessary stranded conductor cross-section can be found in the follow- ing table. Machine type Voltage Extension Stranded conduc- tor cross-section C 48/13 230 1~ < 150 100_0201_td_0003.fm...
14 Glossary 14 Glossary Class rating The class rating according to DIN EN 61140 identifies electrical machines in terms of safety measures for the prevention of an electric shock. There are four class ratings: Class rating Significance No special protection apart from the basic insulation. No grounded conductor.
Page 35
14 Glossary Protection rating IP The protection rating DIN EN 60529 indicates the suitability of electrical ma- chines for certain environmental conditions and also the protection against haz- ards. The protection rating is specified with an IP code according to DIN EN 60529. Code Significance of 1st digit: Protection against contact with hazardous parts.
EC Declaration of Conformity Manufacturer Wacker Neuson Produktion GmbH & Co. KG, Preussenstrasse 41, 80809 Munich Product Product C 48/4 C 48/13 Product category Product function Item number 5100006221 5100002543 Directives and standards We hereby declare that this product meets and complies with the relevant regulations and...