Subscribe to Our Youtube Channel
Related Manuals for Phoenix VX3-350-SCW-DAT
Summary of Contents for Phoenix VX3-350-SCW-DAT
- Page 1 VX3-350-SCW-DAT MASS STORAGE SUBSYSTEM Technical Information Copyright © Phoenix International 1996. All Rights Reserved 812 W. Southern Avenue, Orange, CA 92865...
- Page 2 Nor does Phoenix International assume any liability arising out of the application or use of any product or circuit described herein. Phoenix International reserves the right to make changes to any product and product documentation in an effort to improve performance, reliability or design.
-
Page 3: Table Of Contents
Tape Hardware Configuration Hard Drive Hardware Configuration Considerations for Installation VMEbus Slot Requirements VMEbus Backplane Requirements Power Supply Requirements Installing the VX3-350-SCW-DAT Drive Software Configuration Tape Drive Software Configuration Hard Drive Software Configuration Termination Terminator Power Configuration DIFFSNS Voltage operation... - Page 4 Product Repairs Obtaining an RMA Shipping the Product Providing a Product Defect Report Warranty Repairs Non-warranty Repairs Product Updates Tables Table 2-2 SCSI Pin Definition Table 2-3 P2 Pin Definition Figures Figure 1-1 VX3-350-SCW-DAT Front Panel Figure 1-2 VX3-350-SCW-DAT Jumper Configuration...
-
Page 5: Chapter 1 Manual Organization And Introduction
Chapter 1 Manual Organization and Introduction... - Page 6 This page intentionally left blank.
-
Page 7: Vx3-350-Scw-Dat Introduction
Host Adapter. Together with the processor, a complete system can be installed in only four standard VMEbus system slots. The VX3-350-SCW-DAT provides a DAT drive and a hard disk drive within the same module making it very conve- nient to have fixed and removable data storage. The drives used on board the VX3-350-SCW-DAT were chosen for their compatibility, ruggedness and reliability. -
Page 8: Figure 1-1 Vx3-350-Scw-Dat Front Panel
UNIT 0 UNIT Figure 1-1: VX3-350-SCW-DAT Front Panel VX3-350-SCW-DAT User's Manual... -
Page 9: Figure 1-2 Vx3-350-Scw-Dat Jumper Configuration
Fixed Hard Drive DAT Drive Figure 1-2: VX3-350-SCW-DAT Jumper Configuration Manual Organization and Introduction 1--5... -
Page 10: Chapter 2 Features And Specifications
Chapter 2 Features and Specifications... - Page 11 This page intentionally left blank.
-
Page 12: Scope
This chapter describes the overall features and specifications of the VX3-350-SCW-DAT. Features The VX3-350-SCW-DAT incorporates a very compact winchester disk drive and a DDS-4 DAT drive within a single module. The tape drive is physically compact, occupying only 3 1/2” of panel in the half-height form factor. The hard disk drive is a high-performance winchester type with embedded disk drive control electronics. -
Page 13: Vx3-350-Scw-Dat Specifications
VX3-350-SCW-DAT Specifications The following table provides the specifications of the complete VX3-350-SCW-DAT. Individual disk/DAT drive specifica- tions are given in their respective chapters. General Model: VX3-350-SCW-DAT Description: Hard disk/DAT drive module compatible with LVD/SE SCSI commands. Interface: DAT drive: LVD/SE Ultra-160 SCSI... -
Page 14: Table 2-3 P2 Pin Definition
P2 Connector Pin Definitions P2 Pin Row A Signal P2 Pin Row C Signal -DB0 +DB0 -DB1 +DB1 -DB2 +DB2 -DB3 +DB3 -DB4 +DB4 -DB5 +DB5 -DB6 +DB6 -DB7 +DB7 -DBP -DB8 +DBP -DB9 +ATN -DB10 +SBSY -DB11 +SACK -DB12 +SRST -DB13 +SMSG... -
Page 15: Chapter 3 Configuration, Installation, And Operation
Chapter 3 Configuration, Installation, and Operation... - Page 16 This page intentionally left blank.
-
Page 17: Scope
If you are going to have a VMEbus card located in the next adjacent slot, you should carefully check it to make sure that no leads are likely to touch the VX3-350-SCW-DAT. -
Page 18: Drive Software Configuration
Pin C18. The Terminator power has to be generated at the SCSI Host adapter. Operation Once the VX3-350-SCW-DAT has been configured properly and the software has been set up, operation is identical to that of a standard SCSI storage subsystem. No specialized software is required. - Page 19 Chapter 5 SDT 11000 DAT Drive Details...
-
Page 20: Scope
Scope This chapter describes the SONY SDT 11000 DAT drive in detail. Introduction The SDT 11000 is a high performance 3.5" low profile 40 Gigabyte (compressed) DAT drive that is designed to operate with a SCSI host adapter or equivalent. The drive features low power requirements enabling operation in portable environments. -
Page 21: Power Requirements
Power Requirements + 12 Volt Start-up: 0.75 Amps + 12 Volt Typical: 0.25 Amps + 5 Volt Typical: 1.00 Amps Typical Usage: 8.0 Watts Physical Characteristics Height: 1.625 inches Length: 5.75 inches Width: 4.00 inches Weight: 1.41 pounds, without cartridge Environmental Characteristics Temperature: º... -
Page 22: Chapter 6 Product Support, Service And Warranty
Chapter 6 Product Support, Service and Warranty... - Page 23 This page intentionally left blank.
-
Page 24: Scope
If You Have a Problem If you are having a problem with a Phoenix International product, you should call our main number, (714) 283-4800, and ask for Customer Service. Please be prepared to supply as much detail as you can concerning the nature of the problem and the conditions in which the problem appeared. -
Page 25: Providing A Product Defect Report
Description of the problem/defect: Warranty Repairs Any product returned and found to be under warranty will be repaired or replaced at the discretion of Phoenix Internation- al within five working days of receipt and shipped freight prepaid to the Customer.
Need help?
Do you have a question about the VX3-350-SCW-DAT and is the answer not in the manual?
Questions and answers