Summary of Contents for Messtechnik IBRit-rf1 Series
- Page 1 M e s s t e c h n i k INSTRUCTION MANUAL IBRit - rf1 - usb PC - Station for wireless Data transmission Document No. : D1F604 001 Version : April 2006 Copyright : Messtechnik GmbH & Co. KG...
-
Page 2: Table Of Contents
Manual IBRit - rf1 - usb Contents 1. Introduction 1.1 General information ........................ : 1.2 Features ..........................: 1.3 Technical data ......................... : 2. Setting up the system 2.1 Delivered items ........................: 2.2 System Conditions ........................: 2.3 Installation of the USB – driver for the IBRit - rf1 - usb module..........: 2.4 Function test of the IBRit - rf1 radio module with the programme IBR_SimKey ..... -
Page 3: Introduction
Manual IBRit - rf1 - usb 1. Introduction 1.1 General Information The IBRit - rf1 radio module series allows the wireless transmission of measured values from gauges to a PC with USB - connector. On the PC side the wireless communication with the gauges occurs via the radio module IBRit - rf1 - usb. The module is connected via a USB-Slot to the PC and allows the communication with 1 ... -
Page 4: Features
Manual IBRit - rf1 - usb 1.2 Features PC radio station IBRit - rf1 - usb with USB interface for communication with at maximum 120 gauge radio modules Gauge radio modules IBRit - rf1 - opto for gauges with Opto RS232 interface IBRit - rf1 - digi for gauges with Mitutoyo interface IBRit - rf1 - mahr for gauges with Mahr interface IBRit - rf1 - 232 for gauges with RS232 interface... -
Page 5: Setting Up The System
Manual IBRit - rf1 - usb 2. Setting up the system 2.1 Delivered items PC radio station IBRit - rf1 - usb with USB – connection cable, antenna, wall holder, manual and CD-ROM with USB - driver. Please check the delivery on completeness and store the packet. 2.2 System condition PC with USB - port and operating system Windows 98 / ME / 2000 / XP. -
Page 6: Function Test Of The Ibrit - Rf1 Radio Module With The Programme Ibr_Simkey
Manual IBRit - rf1 - usb d) A new window for the searching of the destination directory is opened : Please select the USB - Driver on the CD and confirm by clicking onto the Open Button e) Now the window of step d) becomes visible again. By clicking the OK Button the installation is started. - Page 7 Manual IBRit - rf1 - usb c) A new window for Installation of the programme IBR_SIMKEY is opened. Please start the installation by clicking the Start - Button. 2. Starting IBR_SimKey Please use the Windows Explorer to go into the IBR_SimKey folder ( z.B. C:\IBR_SimKey ) and start the programme IBR_SimKey.EXE.
- Page 8 Manual IBRit - rf1 - usb After the selection of the PC PC-Connection and the IBR-instrument the columns Connection and Gauge / Sensor are filled. By clicking on the on / off - Buttons in the right area of the window directly the gauge radio modules of the particular PC radio station can be deactivated or activated.
-
Page 9: Programming Of Gauge Radio Modules With The Programme Ibr_Simkey
Manual IBRit - rf1 - usb 3. Programming of gauge radio modules with the programme IBR_SimKey The IBRit - rf1 gauge radio modules can be individually programmed by the programme IBR_SimKey. All settings are stored by the gauge radio modules and are kept existing by a changing of battery. For programming of gauge radio modules please click in the main window of IBR_SimKey ( Window for measurement data display ) onto the Setup - Button. -
Page 10: Confirmation Signals Of The Ibrit - Rf1 Gauge Radio Modules
Manual IBRit - rf1 - usb 4. Confirmation signals of the IBRit - rf1 gauge radio modules The IBRit - rf1 gauge radio modules return for the operator a clearly optical and acoustical confirmation on the programming or measurement value transmission. The operator is immediately informed, whether the transmission was successful or did not occurred If the transmission was not successful then the flashing code of the LED informs the operator over the error-reason. -
Page 11: Safety Instructions
Any modification and procedures concerning the instrument are permitted only with the prior written consent of IBR Messtechnik GmbH & Co. KG and must be carried out by competent staff. Opening the case or tampering with the device without prior permission will lead to the loss of the guarantee and free the producer from all liabilities. -
Page 12: Declaration Of Conformity
Manual IBRit - rf1 - usb 6. Declaration of conformity Thank you very much for your confidence in purchasing this product. We herewith certify that it was manufactured and inspected in our works. We declare under our sole responsibility that this product is in conformity with technical data as specified in this instruction manual. -
Page 13: Guarantee
If returning the instrument under guarantee please use the original packaging. Should you detect an irregularity of any kind, please contact one of our authorised distributors or our Service department. D-36166 Haunetal, 24.04.2006 I B R Messtechnik GmbH & Co. KG A. Schneider Quality Assurance Manager...
Need help?
Do you have a question about the IBRit-rf1 Series and is the answer not in the manual?
Questions and answers