Specifications - Sony DAV-SR2 Operating Instructions Manual

"CANNOT LOCK" appears in the front panel
display.
• Turn the power off and then on again by pressing
[/1 on the system, then perform "On moving the
system" (page 3). If "CANNOT LOCK" still
appears in the front panel display, contact your
Sony dealer or local authorized Sony service
facility.
The system does not work normally.
• Disconnect the AC power cord (mains lead) from
the wall outlet (mains), then reconnect after
several minutes.

Specifications

Amplifier section
Stereo mode (rated)
Surround mode
(reference)
music power output
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs
Output
Phones
Super Audio CD/DVD system
Laser
Signal format system
Frequency response (at 2 CH STEREO mode)
Harmonic distortion
65 W + 65 W (4 ohms at
1 kHz, DIN)
100 100
Front: W + W
(with SS-TS21)
100
Center*: W
(with SS-CT33)
Surround*: 100 W +
100
W
(with SS-TS20)
100
Subwoofer*: W × 2
(with SS-WS12)
VIDEO/SAT:
Sensitivity: 250 mV/
450 mV
Impedance: 50 kilohms
SURROUND BACK
Voltage: 2V
Impedance: 1 kilohms
Accepts low-and high-
impedance headphones.
Semiconductor laser
(Super Audio CD/DVD:
= 650 nm)
(CD: = 780 nm)
Emission duration:
continuous
NTSC or NTSC/PAL
DVD (PCM): 2 Hz to 22
kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0
dB)
Less than 0.03 %
continued
85 GB