Handlink WG-500P 24Roam User Manual
  1. Manuals
  2. Brands
  3. Handlink Manuals
  4. Wireless Router
  5. WG-500P 24Roam
  6. User manual

Handlink WG-500P 24Roam User Manual

Hotspot in a printer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WG‐500P Hotspot in a Printer 
Hotspot in a Printer 
User Manual
0 
 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WG-500P 24Roam and is the answer not in the manual?

Questions and answers

Summary of Contents for Handlink WG-500P 24Roam

  • Page 1 WG‐500P Hotspot in a Printer  Hotspot in a Printer  User Manual 0   ...
  • Page 2 WG-500P Hotspot in a Printer Copyright Notice Copyright © 2013-2022 Handlink Technologies Inc. All rights reserved. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission. Protected by TW patent 223184, JPN patent 3099924, USA patent US8,010,421 B2, EU patent EP1404056BI, China patent ZL03204640.5.

  • Page 3: Table Of Contents

    ................13 Installation Connecting the Antennas ............13 Installation Requirements ............13 Getting Start ................15 ..........17 Configuring the WG-500P 24Roam Setting Wizard ................17 Advanced Setup ................ 27 3-2-1 MANAGEMENT..............28 3-2-1-1 LAN Device ..............28 3-2-1-2 Syslog ................ 29 3-2-1-3 Session Trace ..............
  • Page 4 WG-500P Hotspot in a Printer 3-2-3-7 DDNS ................. 65 3-2-3-8 Wireless ..............67 3-2-3-9 Account Plan ............... 70 System Status ................71 3-3-1 System ................72 3-3-2 Amount log ................. 74 3-3-3 Current User ............... 75 3-3-4 DHCP Clients ............... 76 3-3-5 Session List.................

  • Page 5: Introduction

    WG-500P Hotspot in a Printer Introduction Package Contents Please inspect your package. The following items should be included: WG-500P 24Roam One WG-500P 24Roam  One Thermal papers (50 meter)  One Power Adapter  One Ethernet Cable (1.5 meter) ...

  • Page 6: Precautions

    Use only the original fitting AC power adapter otherwise there is a danger of  severe electrical shock. Avoid exposing the WG-500P 24Roam to direct sunlight or another heat  source. Choose a well-ventilated area to position your WG-500P 24Roam.
  • Page 7 WG-500P Hotspot in a Printer Figure 1-4-2 Front Panel Figure 1-4-3 Rear Panel 1. Paper roll housing 2. Printer Cover 3. Tear Bar, for paper cutting 4. Button A 5. Button B 6. Button C 7. Push Button, for printer cover opening 8.

  • Page 8: Printing A Test Page

    Yellow Blinking: 10/100 Mbps traffic is traversing the port. Reset Button:  The WG-500P 24Roam has a reset button at the rear panel of the device. Use this function to reset the system back to factory defaults. Power Jack: ...

  • Page 9: How To Load Paper Rolls

    WG-500P Hotspot in a Printer 1-4-2 How to load paper rolls Please follow the steps to correctly load paper rolls. Figure 1-4-4 Paper rolls loading...

  • Page 10: Technical Specifications

    WG-500P Hotspot in a Printer Technical Specifications 1-5-1 Hardware Specifications Network Specification IEEE802.3 10BaseT Ethernet  IEEE802.3u 100BaseTX Fast Ethernet  IEEE802.11b/g/n Wireless LAN  ANSI/IEEE 802.3 NWay auto-negotiation  Wi-Fi Compatible  Connectors One WAN Port (10BaseT/100BaseTX Auto cross-over) ...
  • Page 11 WG-500P Hotspot in a Printer Dimension Size: 109×155×90 (W×D×H )mm  Weight: About 340g (Net)  Printer Tray Push button: push to open printer cover  Tear bar: cuts receipt paper  Button A: flashing when printer cover is opened ...

  • Page 12: Software Specifications

    WG-500P Hotspot in a Printer 1-5-2 Software Specifications Networking IEEE802.3 10BaseT Ethernet  IEEE802.3u 100BaseTX Fast Ethernet  IEEE802.11b Wireless LAN  IEEE802.11g Wireless LAN  IEEE802.11n Wireless LAN  Supports 30 Simultaneous Users  IP Plug and Play (iPnP) ...
  • Page 13 WG-500P Hotspot in a Printer User Accounting and Authentication 24Roam Authentication  Web-based Authentication  Logout Window Timer Control  Security and Firewall Layer 2 Isolation Security  SSL User Login page/ Configuration Page  SSL Administration  VPN Pass through (IPSec/PPTP) ...

  • Page 14: Installation

    WG-500P Hotspot in a Printer Installation Connecting the Antennas The WG-500P 24Roam provides two antenna connectors on the rear of the unit. Installation Requirements Before installing the WG-500P 24Roam, make sure your network meets the following requirements. System Requirements The WG-500P 24Roam requires one of the following types of software: Windows 98 Second Edition/NT/2000/XP/Vista ...
  • Page 15 2. The gateway’s default subnet mask setting is “255.255.255.0”. The Dynamic IP settings for the PC We recommend that you leave your IP settings as automatically assigned. By default, the WG-500P 24Roam is a DHCP server, and it will give your PC the necessary IP settings.

  • Page 16: Getting Start

    WG-500P Hotspot in a Printer Getting Start WG-500P 24Roam Connection 1. Connect the DC power adapter to the WG-500P 24Roam and plug it into a power socket. 2. Connect WG-500P 24Roam and xDSL modem with an Ethernet Cable. Figure 2-3-1 WG-500P 24Roam Connection...
  • Page 17 WG-500P Hotspot in a Printer Configure TCP/IP of your computer For Windows user, 1. Click Start > Control Panel, click Switch to Classic View and double click on Network Connections. 2. Right click on the Local Area Connection and click Properties. 3.

  • Page 18: Configuring The Wg-500P 24Roam

    Press Enter. Figure 3-1-1 Web Browser Location Field (Factory Default) Step 3: The WG-500P 24Roam configuration tools menu will appear. In the Username and Password field, type the factory default user name admin and password admin and click Login. If you are first time setting the system, the wizard setup screen will appear.
  • Page 19 WG-500P 24Roam Configuration Program, please press the reset button to load the device to manufacturer defaults. 4. If the WG-500P 24Roam doesn’t send packet in 5 minutes (default), the WG-500P 24Roam wills logout automatically. 5. Proxy needs to set disable first when administrator accesses admin UI.
  • Page 20 WG-500P Hotspot in a Printer Step 4: Internet Connection Setting Select the appropriate Internet connection type to connect to your ISP. Figure 3-1-4 Internet Connection Setting Screen DHCP Client The device can work as a DHCP client. This allows the device to obtain the IP address and other TCP/IP settings from your ISP.
  • Page 21 WG-500P Hotspot in a Printer Static IP Setting If Static IP Setting is selected, then this screen will appear. Enter the IP address information provided by your ISP. Figure 3-1-6 Internet Connection Setting Screen—Static IP Setting Item Default Description IP Address 0.0.0.0 Enter the IP address provided by your ISP.
  • Page 22 64 alphanumeric characters and is case sensitive. Connect on Demand and Max Idle Time Connect on Enable You can configure your WG-500P 24Roam to cut Demand your connection with your ISP after a specified...
  • Page 23 (Max Idle Time). If you have been Minutes disconnected due to inactivity, Connect on Demand enables your WG-500P 24Roam to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button.
  • Page 24 WG-500P Hotspot in a Printer PPTP Client (Point-to-Point Tunneling Protocol) If PPTP Setting is selected, then this screen will appear. Please enter the IP address, Username and Password provided by your ISP. Figure 3-1-8 Internet Connection Setting Screen—PPPoE Setting Item Default Description Username...
  • Page 25 64 alphanumeric characters and is case sensitive. Connect on Demand and Max Idle Time Connect on Enable You can configure your WG-500P 24Roam to cut your Demand connection with your ISP after a specified period of time (Max Idle Idle...
  • Page 26 WG-500P Hotspot in a Printer Step 5: Wireless Setting Wireless Setting: This page allows you to Channel ID and 802.11 Mode for wireless connection. Figure 3-1-9 Wireless Setting Screen Item Default Description Country ESTI Select the desired country code. The options are US and ETSI.
  • Page 27 WG-500P Hotspot in a Printer Step 6: System Setting System Setting: WG-500P 24Roam allows to change the administrator’s Username and Password, and an NTP server setting. Figure 3-1-10 System Setting Screen Item Default Description Username admin Enter the user name. The user name can consist of up to 80 alphanumeric characters and is case sensitive.

  • Page 28: Advanced Setup

    WG-500P Hotspot in a Printer IP Address remote control the system. Click FINISH button to save the settings then the system will restart. Advanced Setup The Advanced Setting enables you to configure advanced settings related to accessing the Internet, including, MANAGEMENT LAN DEVICE ...

  • Page 29: Management

    WG-500P Hotspot in a Printer 3-2-1 MANAGEMENT 3-2-1-1 LAN Device Administrator can direct remote control to LAN Devices via the Wireless Subscriber Gateway implemented the feature. Figure 3-2-2 LAN Device Setting Screen Item Default Description Polling Interval 5 Min. The default value is 5 minutes. The Polling Interval valid range is 1 to 1440.

  • Page 30: Syslog

    WG-500P Hotspot in a Printer 3-2-1-2 Syslog The function allows the device to transmit event messages to your syslog server or your email address for monitoring and troubleshooting. Syslog Setting Figure 3-2-3 Syslog Setting Screen Item Default Description Send Disable Enables or disables the syslog server function.
  • Page 31 WG-500P Hotspot in a Printer Item Default Description Syslog on WAN Server Empty Enter IP address of first syslog server. Address Server Empty Enter IP address of second syslog server. Address Send to Email Disable Enables or disables the send to e-mail function. E-mail Server IP Address or Empty...
  • Page 32 WG-500P Hotspot in a Printer Log Categories Figure 3-2-4 Log Settings Screen...
  • Page 33 WG-500P Hotspot in a Printer Item Default Description System Device Every The range is 5~60 minutes. The log included system information would be sent according to specified interval Information minute(s) time. Format： PRODUCT=WG-500P 24Roam:VER=2.00.00;LOGNAME=DVI; DATE=07Mar26;TIME=11:30:00; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-0 WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; SYS_UP_TIME=14D23H34M21S;WANTXOK=99999; WANRXOK=99999;WANTXERROR=99999;WANRXERROR= 99999;...
  • Page 34 WG-500P Hotspot in a Printer WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-0 WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; SYS_NAME=Cafehotspot;LOCATION=East;CITY=Taipei; COUNTRY=Taiwan; FIRMWARE=v1.01.02;MESSAGE=System_Up; Account Name = Admin | Supervisor | Operator Status= Login | Logout | Idle_Time_Out Firmware When A log will be sent if firmware update completed Format: Update Notice firmware PRODUCT=WG-500P update 24Roam;VER=2.00.00;LOGNAME=FUN;...
  • Page 35 WG-500P Hotspot in a Printer WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12;USER_I P=10.59.1.1; USER_MAC=02-34-3e-01-00;INTERFACE=Ethernet; USER_TYPE=Dynamic; User Type = Dynamic / Super / User Agreement / Radius / No-Auth When User Replenish login format: PRODUCT=WG-500P 24Roam;VER=2.00.00;LOGNAME=URP;DATE=07Mar26; TIME=15:23:32; WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12; REP_USER_NAME=kifm2fs3;USER_IP=10.59.1.1; USER_MAC=02-34-3e-01-00; INTERFACE=Ethernet; USER_TYPE=Dynamic; USED_TIME=24:00:00;TIME_LEFT=24:00:00 User Type = Dynamic / Radius A log including users information will be sent when user User Logout...
  • Page 36 WG-500P Hotspot in a Printer LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NUM=0;SEQ=1-5; USER_NAME=asdfg12,USER_IP=10.59.1.2,USER_MAC=02- 34-3e-01-00, INTERFACE=Ethernet,USER_TYPE=Dynamic,RXDATA=123 TXDATA=1234,USED_TIME=24:00:00,SESSION=100,WLA N_SIG=N/A; USER_NAME=dk6uf2eg,USER_IP=10.59.1.3,USER_MAC=0 2-34-3e-01-02, INTERFACE=Wireless,USER_TYPE=Dynamic,RXDATA=1234 TXDATA=1234,USED_TIME=24:00:00,SESSION=100,WLA N_SIG=100%; User Type = Dynamic / Super / User Agreement / Radius / No-Auth User Name = If the type of user is Super/User Agreement/No-Auth , the username=**** Account and Billing...
  • Page 37 WG-500P Hotspot in a Printer TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=username; BILL_TYPE=Cash, BILL_AMOUNT= USD50.00 Billing Type= Cash | Credit_Card； Billing Amount = xx.xx Currency = AUD | CHF | EUR | GBP | JPY | RIY | USD…… LAN Device A log including current LAN Devices Status will be sent Device The detecting according to specified interval time...

  • Page 38: Session Trace

    WG-500P Hotspot in a Printer 3-2-1-3 Session Trace Session Trace is an intelligent function to help service provider to trace every user’s access behavior. When “session trace” is enable , the system will collect information such like destination IP, destination port, source IP, source MAC, source port by every user and send the collected information in text format file to specified TFTP server or Email Server.
  • Page 39 WG-500P Hotspot in a Printer E-mail Server IP Address or Empty Enter the SMTP server IP address or domain name. Domain Name The maximum allowed characters length is 50. SMTP Port Empty The SMTP port allowed range is 25 or 2500 to 2599. E-mail (SMTP) Disable If your SMTP server requires authentication before...

  • Page 40: Bandwidth

    WG-500P Hotspot in a Printer 3-2-1-4 Bandwidth The function enables administrator to limit bandwidth usage on a per user basis (MAC address). That prevents users from consuming a disproportionately large amount of bandwidth so every user gets a fair share of the available bandwidth. Figure 3-2-6 Bandwidth Setting Screen Item Default...

  • Page 41: Snmp

    WG-500P Hotspot in a Printer 3-2-1-5 SNMP The SNMP Agent Configuration screen enables you to access to your device via Simple Network Management Protocol. If you are not familiar with SNMP, please consult your Network Administrator or consult SNMP reference material. You must first enable SNMP on the SNMP Agent Configuration screen.
  • Page 42 WG-500P Hotspot in a Printer for different privileges. The default setting of the entry 2 is “write” and others are “read”. Status Valid/Invalid Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are valid and others are invalid.

  • Page 43: Security

    This function allow administrator to set some special devices pass through the WG-500P 24Roam system. Because some network devices might be constructed under the WG-500P 24Roam. However these devices needn’t be checked and authorized. The WG-500P 24Roam provides a pass through list and the administrator can control which devices can be pass through with authentication.
  • Page 44 Enter the MAC address of you wants pass through. Mask Empty Enter the subnet mask of you wants pass through. Pass Through Display the pass through Information of WG-500P 24Roam. List The index number of pass through address. Active Disable Click on check box, active or inactive the pass through address.

  • Page 45: Filtering

    WG-500P Hotspot in a Printer 3-2-2-2 Filtering Filtering allows the system administrator to have a list of restricted destinations, which is useful to block specified Internet websites or Intranet areas. Figure 3-2-9 Filtering Setting Screen Item Default Description Filtering Disable Enables or disables filtering function.

  • Page 46: System

    Click Add to List button to add a new entry. Click Apply button to save the new settings. Click Delete All & Apply button to delete all entries. 3-2-3 SYSTEM 3-2-3-1 System Define the WG-500P 24Roam System configuration. Figure 3-2-10 System Setting Screen...
  • Page 47 WG-500P Hotspot in a Printer Figure 3-2-11 System Setting Screen Item Default Description System/Host Empty The system name can consist of up to 40 Name alphanumeric characters. Domain Name Empty The Domain name can consist of up to 80 alphanumeric characters. Location Empty Enter your location information.
  • Page 48 Enter the number of hours for update time. Daylight Saving Disable Enables or disables Daylight Saving Time Time (DST). Month/Day Set the Daylight Saving Time (DST) on the WG-500P 24Roam. Adjust the begin time and end time. NAT (Network Address Translation) Enable Enables disables Address Translation function.
  • Page 49 Allow remote Enable This function allows remote user to ping the user to ping the WG-500P 24Roam through Internet. Ping is device normally used to test the physical connection between two devices, to ensure that everything is working correctly.

  • Page 50: Wan/Lan

    WG-500P Hotspot in a Printer 3-2-3-2 WAN/LAN Figure 3-2-12 WAN/LAN Setting Screen...
  • Page 51 WG-500P Hotspot in a Printer Item Default Description IP Address 10.59.1.1 The internal LAN IP address of your Wireless Subscriber Server Gateway. Subnet Mask 255.255.255.0 Enter the subnet mask for the IP address. WAN MAC Address IP Address The default MAC address is set to the WAN physical interface on device.

  • Page 52: Server

    64 alphanumeric characters and is case sensitive. Connect on Enable You can configure your WG-500P 24Roam to cut Demand your connection with your ISP after a specified period of time (Max Idle Time). If you have been...
  • Page 53 “http://HTTP Port IP Address: Port Number”. HTTPS Port Enter the HTTPS port number. The HTTPS port allowed range is 443 or 4430 to 4440. For access the WG-500P 24Roam system, please tab the “https://HTTPS Port IP Address: Port Number”. DHCP Server Enable There are three types of DHCP Services.
  • Page 54 Empty Enter the IP address of DHCP server. Address DHCP Server The WG-500P 24Roam's DHCP server is turned on and running by default when you install it in your network. DHCP Pool 10.59.1.2 Enter the DHCP Pool Starting IP address.
  • Page 55 WG-500P Hotspot in a Printer...
  • Page 56 WG-500P Hotspot in a Printer Static DHCP This function allows subscriber to assign IP address on the LAN to specific individual computers based on their MAC Address. Figure 3-2-14 Server Setting Screen Item Default Description Empty Enter the IP address that subscriber want to assign to the Address computer on LAN with the MAC address the subscriber will also specify.

  • Page 57: Customization

    3-2-3-4 Customization Login Page The WG-500P 24Roam provides three different login page formats, including standard, redirect, advanced and frame format. And this function allows service provider five text (English, Germanic, French, Italian, and Spanish) of login page. Figure 3-2-15 Customization Setting Screen...
  • Page 58 WG-500P Hotspot in a Printer Figure 3-2-16 Login Page – English Version Figure 3-2-17 Login Page – Germanic Version Figure 3-2-18 Login Page –French Version Figure 3-2-19 Login Page –Spanish Version...
  • Page 59 WG-500P Hotspot in a Printer Figure 3-2-20 Login Page –Italian Version Information Window This function allow service provider can decide whether they want an “Information Window” pop-up on subscriber PC when authenticate successful or not and specified text of information window. Subscriber can type “http://1.1.1.1/info” to open the information window again or enter “http://1.1.1.1/logout”...
  • Page 60 WG-500P Hotspot in a Printer Figure 3-2-22 Information window Setting Screen...
  • Page 61 WG-500P Hotspot in a Printer Figure 3-2-23 Information Window – English Version Figure 3-2-24 Information Window – Germanic Version Figure 3-2-25 Information Window–French Version Figure 3-2-26 Information Window –Spanish Version...
  • Page 62 WG-500P Hotspot in a Printer Figure 3-2-27 Information Window –Italian Version Account Printout This function allow service provider to specified text of account printout. Figure 3-2-28 Account Printout Customization Setting Screen Note: If you don’t print out QR code on the ticket, please disable “QR Code”.
  • Page 63 WG-500P Hotspot in a Printer Figure 3-2-29 Account Printout – W/QR Code Figure 3-2-30 Account Printout – W/O QR Code...

  • Page 64: Portal Page

    WG-500P Hotspot in a Printer 3-2-3-5 Portal Page This feature allows redirecting subscriber’s browser to a specified portal page after successful login. Figure 3-2-31 Portal Page Setting Screen Item Default Description Empty Enter the URL Link page. The input format can be Link “http://www.yahoo.com”.

  • Page 65: Walled Garden

    WG-500P Hotspot in a Printer 3-2-3-6 Walled Garden We prepare ten URL links that allows subscriber to access the specific Web pages even they didn’t have a username or password. It’s free trying and can use for advertisement. Figure 3-2-32 Walled Garden Setting Screen Item Description Name...

  • Page 66: Ddns

    IP associated with dynamic IP addresses. When the ISP assigns the WG-500P 24Roam a new IP, the WG-500P 24Roam must inform the DDNS server the change of this IP so that the server can update its IP-to-DNS entry. Once the IP-to-DNS table in the DDNS server is updated, the DNS name for your web server (i.e., xyz.dyndns.org) is still usable.
  • Page 67 WG-500P Hotspot in a Printer Force to update 1 day Enter a number in the field to set the every~day(s) when force update interval (in days). WAN IP address keeps no change 01~03 The index number of a DDNS account. Active Disable Click on check box, active or inactive the...

  • Page 68: Wireless

    WG-500P Hotspot in a Printer *.mydomain.dyndns.org and not only mydomain.dyndns.org. Click Apply button, the success dialog box appears. Click on Back to return to DDNS setting screen. 3-2-3-8 Wireless Wireless Setting Screen Figure 3-2-34...
  • Page 69 WG-500P Hotspot in a Printer Item Default Description General Settings ESSID Wireless The ESSID’s name by default is “ Wireless” . It is case sensitive and must not exceed 32 characters. Broadcast Enable Broadcast or Hide the ESSID Wireless Enable Enable or Disable wireless connection.
  • Page 70 A low RTS Threshold setting can be useful in areas where many client devices are associating with the WG-500P 24Roam, or in areas where the clients are far apart and can detect only the WG-500P 24Roam and not each other.

  • Page 71: Account Plan

    The preamble type is a section of data at the head Preamble of a packet that contains information the WG-500P 24Roam and client devices need when sending and receiving packets. The setting menu allows you to select a long, short or dynamic preamble type.

  • Page 72: System Status

    WG-500P Hotspot in a Printer System Status Display WG-500P 24Roam system basic status, including, 1. System 2. Amount Log 3. Current User 4. DHCP Clients 5. Session List 6. LAN DEVICES Figure 3-3-1 System Status Item Screen...

  • Page 73: System

    WG-500P Hotspot in a Printer 3-3-1 System The System Information Menu displays current system basic information including the service connection message, host name, LAN, WAN, DHCP Configuration, DNS, E-mail Redirection, SSL Certificate, network traffic Information and the system firmware version number. Figure 3-3-2 System Status Screen...
  • Page 74 WG-500P Hotspot in a Printer Figure 3-3-3 System Status Screen...

  • Page 75: Amount Log

    WG-500P Hotspot in a Printer 3-3-2 Amount log The amount log shows the total amount and coin box pulled values Figure 3-3-4 Current User List This allow you to export the account logs to a text file format. (export.log) Reset Click on Reset button to remove all account log entries.

  • Page 76: Current User

    WG-500P Hotspot in a Printer 3-3-3 Current User Display the current logged-in subscribers’ status. It allow service provider to disconnect any subscribers. Figure 3-3-5 Current User List Click refresh button to update the current user list page. Click the column button (Interface, Type, Username, IP Address, …, etc.) to sort the column in ascending/descending order.

  • Page 77: Dhcp Clients

    WG-500P Hotspot in a Printer 3-3-4 DHCP Clients The DHCP client table shows the current DHCP users on the LAN. Figure 3-3-6 Current User Screen 3-3-5 Session List The remote site administrator could monitor the real time usage status of WG-500P 24Roam via this page.

  • Page 78: Lan Device

    WG-500P Hotspot in a Printer 3-3-6 LAN Device You can manage all devices by clicking on device name to access device’s Web-based interface. Click Figure 3- 1 LAN Devices Status Screen Figure 3- 2 Example- Ethernet Switch Management Screen...

  • Page 79: System Tools

    WG-500P Hotspot in a Printer System Tools This allows service provider or administrator to process Firmware upgrade, change password and backup or restore configuration. 1. Configuration 2. Firmware 3. Boot Code 4. Controller Board Firmware 5. System Account 6. SSL Certificate 7.

  • Page 80: Configuration

    WG-500P Hotspot in a Printer 3-4-1 Configuration Use the Configuration item to save, restore or reset configuration parameters of the WG-500P 24Roam. Figure 3-4-2 Configuration Setting Screen Item Default Description Backup Click it to save the system configuration to your computer. (export.cfg)

  • Page 81: Firmware Upgrade

    WG-500P Hotspot in a Printer 3-4-2 Firmware Upgrade The Firmware Upgrade menu loads updated firmware to be permanent in flash ROM. The download file should be a binary file from factory; otherwise the agent will not accept it. After downloading the new firmware, the agent will automatically restart Manual Firmware Upgrade Figure 3-4-3 Manual Firmware Upgrade Setting Screen Item...
  • Page 82 WG-500P Hotspot in a Printer Scheduled Firmware Upgrade Scheduled Firmware Upgrade is a program that enables an automatic upgrade to the latest firmware version through the TFTP server. Figure 3-4-4 Scheduled Firmware Upgrade Setting Screen Item Default Description Disable/Enable Disables or enables the scheduled firmware upgrade function.

  • Page 83: Boot Code

    WG-500P Hotspot in a Printer 3-4-3 Boot Code Figure 3-4-6 Boot Code Upgrade Setting Screen 3-4-4 Controller Board Firmware Figure 3-4-7 Controller Board Firmware Upgrade Setting Screen...

  • Page 84: System Account

    WG-500P Hotspot in a Printer 3-4-5 System Account Use the System Account screen to change the system accounts. Figure 3-4-8 System Account Setting Screen...
  • Page 85 Press Enter. Figure 3-4-9 Web Browser Location Field (Factory Default) Step 2: The WG-500P 24Roam configuration main menu will appear. Enter admin as the Username and admin as the password and click Login. If you are first time setting the system, the wizard setup screen will appear.
  • Page 86 WG-500P Hotspot in a Printer Super Subscriber Account Start your Web Browser; a subscriber login page will appear. Enter super as the Username and super as the password and click Enter, you can use Internet now. Figure 3-4-11 Subscriber Login Page...

  • Page 87: Ping Command

    Enter the IP address or the URL link. 3-4-7 Restart If your WG-500P 24Roam is not operating correctly, you can choose this option to display the restart WG-500P 24Roam screen. Clicking the apply button restart the WG-500P 24Roam, with all of your settings remaining intact.

  • Page 88: Appendix A Signal Connection Arrangements

    Appendix A Signal Connection Arrangements RJ-45 Ethernet Port The WG-500P 24Roam RJ-45 Ethernet port can connect to any networking devices that use a standard LAN interface, such as a Hub/Switch Hub or Router. Use unshielded twisted-pair (UTP) or shield twisted-pair (STP) cable to connect the networking device to the RJ-45 Ethernet port.

  • Page 89: Appendix B Regulations/Emi Compliance

    WG-500P Hotspot in a Printer Appendix B Regulations/EMI Compliance FCC Regulatory Statement Part 15-Class B compliant device This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2.

  • Page 90: Limited Warranty

    How long the warranty is effective: The WG-500P 24Roam is warranted for one year for all parts and one year for all labor from the date of the first consumer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
  • Page 91 WG-500P Hotspot in a Printer service center. 4. For additional information, contact your dealer or our Customer Service Center. Limitation of implied warranties: THERE ARE NOWARRANTIED, EXPRESSED OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Table of Contents