Using The Sony Tv Direct Function - Sony DAV-FR1 Operating Instruction corrections (pgs. 27, 42, & 91) Operating Instructions Manual

Using the SONY TV DIRECT
Function
SONY TV DIRECT allows you to turn on your
SONY TV and this system, change the system
mode to "DVD," and then switch the TV's input
source you set with one button push.
TV/VIDEO
Number
buttons
With cover opened.
Preparation
Register the TV's input source connected to this
system.
Press and hold TV/VIDEO while entering
the code for the TV's input source to
connect this system (see table below)
using the number buttons.
TV's input source is selected.
If you successfully set the TV's input source
code, the TV button flashes twice slowly. If the
setting is unsuccessful, the TV button flashes
five times quickly.
By pressing Number
TV/VIDEO
SONY TV
DIRECT
* Except for North American models.
Operation
Point the remote to the direction of TV and this
system, then press SONY TV DIRECT once.
TV button While transmitting the code from the remote, the
TV CH +
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
To change the transmit time
Press and hold TV CH + while entering the
code for transmit time (see table below) using
the number buttons.
The transmit time from the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
By pressing Number
TV CH+
TV's input source
0 No input source
(Default)
1 VIDEO1
2 VIDEO2
3 VIDEO3
4 VIDEO4
5 VIDEO5
6 VIDEO6
7* COMPONENT1
INPUT
8* COMPONENT2
INPUT
Transmit time
1 0.5 (Default)
2 1
3 1.5
4 2
5 2.5
6 3
7 3.5
8 4
continued
69 US