Table of Contents
Summary of Contents for Omniscout LT200
-
Page 1: Table Of Contents
2.1.1 SIM card requirements 2.1.2 Installing the GSM/GPRS SIM Card Charging the battery Powering Up the omniscout unit LOGGING IN TO THE OMNISCOUT CONTROL CENTRE Registering your SIM card 3.1.1 Entering the SIM information 3.1.2 Update the unit omniscout Control Centre Functions The Settings Page 3.3.1 How to use the Settings Page... -
Page 2: Certification & Information
1 Certification & Information The LT200 is a location based tracking device operating on GPRS/GSM. This equipment complies with the European R&TTE directive. Copies of the EC Declaration of Conformity are available from the company. Please send your request to:... -
Page 3: Getting Started
Congratulations on the purchase of your omniscout unit! When using your omniscout unit for the first time the battery will need to be fully charged using the AC Battery Charger supplied with the omniscout Portable unit. We also recommend that the unit be recharged after each day of use. -
Page 4: Your Own Sim Card
The omniscout LT200 communicates with the omniscout Control Centre through GSM/GPRS cellular networks. To get the LT200 unit online and tracking it will first require an active SIM card. Specifications of this SIM card are that it must have an Unrestricted Data Plan and can send/receive text messages. This will allow the unit to connect to the omniscout server. -
Page 5: Charging The Battery
When inserting a charged battery the omniscout unit will power ‘ON’. To charge the omniscout unit, depress (pinch) the locking tabs on both side of the AC adapter, using your thumb and index finger, and insert into the Adapter Port located the side of the unit. When fully inserted, release the locking tabs. -
Page 6: Powering Up The Omniscout Unit
Power ON vs. Power OFF (ascending tones for Power ON, descending tones for Power OFF) Notes about GPRS and GPS reception Please be aware that your omniscout unit is reliant on reception of GSM/GPRS and GPS signals. In some areas, for example, indoor locations or underground tunnels, the unit may not be able to establish a connection until you move the unit to a different location. -
Page 7: Logging In To The Omniscout Control Centre
3 Logging in to the omniscout Control Centre In order to access your omniscout account online, where you may adjust and set individual functions you will need to know: Your omniscout Account ID Your omniscout User ID Your omniscout Password This information is provided by either mail and/or email. -
Page 8: Update The Unit
To the left of the Map click the POWER SETTINGS button. Click the Reset option The unit will soon reboot and be able to receive commands in 5-10 minutes. 1-877-98SCOUT Worldscout Corporation Page 8 of 11 1-877-987-2688 www.omniscout.com omniscout Quick Start Guide.doc... -
Page 9: Omniscout Control Centre Functions
MAP page of the omniscout Control Centre. Select ‘MAP” from the menu bar: The MAP page of the omniscout Control Centre is where you can turn functions ON or OFF. The factory default is that all functions are turned OFF. -
Page 10: The Settings Page
Please refer to the online HELP for detailed information on omniscout functions. 3.3.1 How to use the Settings Page Step 1: Select the Vehicle NOTE: If you own more than 1 omniscout you can use the “Many Vehicles” button to set up more than 1 vehicle at a time: •... - Page 11 Step 4: Turn the function ON. Note: Low Battery and Personal Alert are always ON. You are simply telling the omniscout that you (or anyone you choose) would like to be notified and where the Alert Notifications should be sent.
Need help?
Do you have a question about the LT200 and is the answer not in the manual?
Questions and answers