INPUT - 1/4"-6.35mm Jack Hi-Z Input for instrument level inputs eg. electric guitar HEADPHONES - 1/4"-6.35mm Jack TRS Output for headphone monitoring NOTE: • Connecting headphones will disengage SG10 6" speaker GAIN - Gain control increases input gain and distortion. Moves through three modes of •...
Page 3
If you use non-chargeable batteries, the speaker still will work perfectly, and will not charge the non-chargeable batteries Power Input Located on back of amp cabinet • Use only supplied IEC-C7 power cable. Contact SWAMP Industries for advice • on replacement if required...
DO NOT OPEN • To reduce risk of electric shock, never open the unit. There are no user serviceable parts, refer service to an authorised SWAMP service center. • Do not expose this unit to any kind of moisture. •...
Need help?
Do you have a question about the SG10 and is the answer not in the manual?
Questions and answers