Table of Contents
Advertisement
0.0 - 7.0 m**/
0 - 23 ft
Be sure to change the value in the Setup Display
when you move the speakers.
[L/R]
*
3.0 m/10 ft
(appears except
when you set
[SURROUND] to
[NONE] in the
[SIZE] setting.)
* When you perform the Quick Setup (page 19), the
default settings are changed.
** 0.0 to 6.9 meters for North American models.
Note
• When you set the distance, the sound cuts off for a
moment.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
0.0 dB
[CENTER]
0.0 dB
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
76
GB
Surround speaker distance from
the listening position can be set in
0.2 meter (1 ft) increments from
0.0 to 7.0 meters** (0 to 23 ft).
Set this between –6.0 dB and 0.0
dB in 1.0 dB increments.
Set this between –6.0 dB and +6.0
dB in 1.0 dB increments.
[SUBWOOFER]
Set this between –6.0 dB and +6.0
0.0 dB
dB in 1.0 dB increments.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
(This settings appear except when you set
[SURROUND] to [NONE] in the [SIZE]
setting.)
[L/R]
Set this between –6.0 dB and +6.0
0.0 dB
dB in 1.0 dB increments.
To adjust the volume of all the
speakers at one time
Turn the VOLUME control on the system, or
press VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu appears.
2
Press X/x to select
then press ENTER.
The options for [SETUP] appear.
3
Press X/x to select [CUSTOM], then
press ENTER.
The Setup Display appears.
4
Press X/x repeatedly to select
[SPEAKER SETUP], then press ENTER
or c.
5
Press X/x repeatedly to select [TEST
TONE], then press ENTER or c.
[SETUP],
Hide quick links:
Advertisement
Table of Contents
