Download Print this page

iDTRONIC ID Lock 1000 Instruction Manual page 4

13.56 mhz rfid device

Advertisement

Mode specification
1
Mode specification
Setting mode: Press button 3
1.1
Fixed private mode
After sound "di", lock bolt stick out.
Read the card →motor rotate, lock open →after 3s, lock bolt stick out, lock close
1.2
Temporary public mode
After sound "di, di", the lock bolt retracts.
It keeps unlock before read any temporary card.
Users can swiping any card to lock, and use the same card to open.
1.3
Fixed public mode
After sound "di, di, di", the lock bolt stick out.
It keeps lock before read card.
After change to fixed public mode, need to set fixed card through manage card.
After set fixed card, swiping card to open lock, the lock bolt will keep retracted.
Swiping the fixed card to close the lock.
1.4
Random public mode (factory default)
Before setting mode, user can use any card to close the lock, and need use the same card to open the lock.
After setting mode and setting manage card, change to temporary public mode.
2
Introduction of Function Buttons
2.1
Button 1: Set manage card
Press button 1 for 2s, the lock issue a short "di", then enter into card configuration, swiping one card to be manage card.
After long sound "di", the green light will flash, it means setting the card successfully.
After two short sound "di, di", the red light will flash, it means setting the card unsuccessfully.
Can only set one card to be managing card.
The manage card can only be used to set card but cannot be used to open the lock (Only temporary public mode
can open the lock).
Remark: Set user card (only Fixed private mode & Fixed public mode)
Swiping manage card, the lock issue "di", then enter into card configuration, the green light will flash , then
swiping one card to be user card.
After sound "di", it means setting the user card successfully.
Can set user card continuously as long as the green light flash.
Each lock can accept 50pcs card at most.
2.2
Button 2: Set delete card
Press button 2 for 2s, the lock issue a short "di" and enter into setting card, swiping one card to be delete card.
Delete card can delete all users cards at one-time but cannot delete the manage card.
Delete card cannot be used to open the lock.
Page 4 of 7
Instruction Manual
RFID Devices

Advertisement

loading