Advertisement
Quick Links
Power and Data Connections
RS 485 and power via XLR 4
XLR 4
1
2
3
4
RS485 and power via Ethercon
RJ 45 Plug
EIA/TIA 568B
1
Orange/White
2
Orange
3
Green White
4
Blue
5
Blue /White
6
Green
7
Brown/White
8
Brown
RJ45 – XLR4 Pin-out
RJ45 Plug
EIA/TIA 568B
1
Orange/White
2
Orange
3
Green/White
4
Blue
5
Blue/White
6
Green
7
Brown/White
8
Brown
Agile Remote Cameras Ltd
Otterbourne Farm, Kiln Lane. Winchester. Hants. SO21 2EN UK
+44(0) 1962 711211 hello@agileremotecameras.com
RS 485 Description
Ground
RS 485 +
RS 485 -
9-24V 1.5A
RS 485 Description
RS 485 +
RS 485 -
Not Connected
DC +
DC +
Not Connected
DC Ground
DC Ground
RS485
XLR 4 Male
Description
RS485 +
2
RS485 -
3
Not Connected
Not Connected
DC +
4
DC +
4
Not Connected
Not Connected
DC Ground
1
DC Ground
1
ARC Maxi Controller
Operating Instructions
IP/POE
IMPORTANT NOTE: The desk must use the 12V power supply provided.
Advertisement
Summary of Contents for Agile Remote Cameras ARC Maxi Controller
- Page 1 Power and Data Connections RS 485 and power via XLR 4 ARC Maxi Controller XLR 4 RS 485 Description Ground Operating Instructions RS 485 + RS 485 - IP/POE 9-24V 1.5A RS485 and power via Ethercon RJ 45 Plug EIA/TIA 568B...
- Page 2 Introduction IP/POE via Ethercon The ARC Maxi controller provides full functional control for up to 12 ARC cameras. RJ 45 Plug EIA/TIA 568B Description Designed to offer the operator an ergonomic layout with easy access to all the key Orange/White Transmit + (Tx +) engineering functionally required.
- Page 3 Control of these functions is accessed via the menu. Manual white balance will allow for full control of the RGain and BGain functions. Please note, when powering up the ARC Maxi Controller, the WB, Focus and exposure mode need to be adjusted to ensure that they are in sync with the camera.
- Page 4 Presets Address Set UP Storing and deleting presets is managed through menu’s V and W. To store a preset position, drive the camera to the desired position and adjust the zoom and focus. With Preset Store selected, press the allocated numbered button, the button will illuminate to confirm the position has been stored.
Need help?
Do you have a question about the ARC Maxi Controller and is the answer not in the manual?
Questions and answers