Disposal Of Packaging Materials; Inserting / Replacing The Batteries; Handling And Operation; Switching The Keyboard On And Off - Silvercrest SBT 3.0 A1 Operating Instructions Manual

Disposal of packaging materials

The packaging protects the device from damage during carriage.
The packaging materials have been selected for their environmental
friendliness and ease of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste that is generated.
Dispose of packaging materials that are no longer needed in
accordance with applicable local regulations.

Inserting / replacing the batteries

♦ Open the battery compartment
♦ Insert 2 x 1.5 V batteries (type AAA/Micro) into the battery compart-
ment (observe correct polarity).
♦ Close and secure the battery compartment.
NOTE
► As soon as the indicator LED
half-second, the batteries are almost depleted and must be replaced.
CAUTION
► Always use batteries from the same manufacturer and of the same
type. Always replace both batteries at the same time.

Handling and operation

This section provides you with important information on handling and
using the device.
Switching the keyboard on and off
♦ Set the ON/OFF switch
on and activate the Bluetooth
up for 2 seconds.
♦ Set the ON/OFF switch
off and deactivate the Bluetooth
SBT 3.0 A1
on the underside of the keyboard.
starts continuously fl ashing every
to the ON position to switch the keyboard
function. The indicator LED
®
to the OFF position to switch the keyboard
function.
®
GB
lights
55