Auto-Setup - Siemens SIMATIC MV500 Operating Manual

Application
5.1 Program
5.1.4.1

Auto-setup

The Auto-setup functions assist you in the parameter assignment of a new or existing
program. You have the option of having the parameters assigned automatically or making
the settings manually.
Using the button in this area, you can start an automatic search for machine-readable codes.
Table 5- 22
Button
Code type
If a code is detected, the decoding order is adjusted so that you can read the code type
found. For this, the detected code type is entered in the decoding order, and existing entries
are removed from the decoding order. The search process can take a few seconds.
You use the "Back" and "Next" buttons to either return to the previous program step or
switch to the next program step.
Notes on the different code types
Note
Code 32
The "Code 32" code type is a subtype of the "Code 39" code type and cannot be
distinguished from "Code 39" based on the printed image. "Code 32" is therefore recognized
as "Code 39" when the "Recognize code type" function is used.
Pharmacode
Ensure that pharmacodes are oriented correctly. Readers cannot identify the
orientation/rotational position of a pharmacode. If pharmacodes are rotated by 180°, this will
result in incorrect read results.
Code 39+CS / Int. 2/5+CS
The code types "Code 39" and "Interleaved 2/5" support an optional checksum in the last
character of the code.
• It is not possible to identify from the printed image whether or not a checksum is used.
• If you use a checksum, manually switch to the code type "Code 39 + CS" or "Int.
2/5+CS".
40
Auto-setup
Description
Using this button, you can start an automatic search for machine-readable codes.
Operating Manual, 05/2019, C79000-G8976-C495-02
SIMATIC MV500