Advertisement
Advertisement
Table of Contents
Related Manuals for optimax TMS300
Summary of Contents for optimax TMS300
- Page 1 ® OPTIMUM QUALITY MAXIMUM RELIABILITY TMS300 Operating Instructions...
-
Page 2: Specifications
® TMS300 Description ® The Optimax TMS300 semi-automatic strapping machine provides easy to use, entry-level strapping of assorted-size consignments using polypropylene strapping. A fully enclosed cabinet protects the strapping reel from damage and contamination. Features > Entry-level semi-automatic strapping machine >... -
Page 3: Safety Instructions
® OPTIMUM QUALITY MAXIMUM RELIABILITY Safety instructions Before operation a. Read the instruction manual b. Verify that the mains supply voltage is correct for the strapping machine and is properly earthed This strapping machine can only be used with polypropylene (PP) strap; do not use polyester (PET) or polyethylene (PE) cord strap d. - Page 4 General safety remarks (cont.) To minimise environmental impact, all consumables and replaced parts must be disposed of appropriately inaccordance with local/national regulations d. In addition to the operator instructions, the user is to be instructed in all generally applicable legal or mandatory regulations relevant to safety and the environment e.
-
Page 5: Operating The Machine
® OPTIMUM QUALITY MAXIMUM RELIABILITY Operating Instructions – Start-up Machine overview Power switch The feed motor starts running when this is pressed Feed length adjustment Adjusts the amount of strap fed based on elapsed time Reset button Pulls the strap back into the machine and cuts the strap Strap feed switch Manual strap feed override, continues to feed strap while pressed Power plug... -
Page 6: Maintenance
Adjustments Strap width The strap width adjustment requires a Philips head screwdriver and a 4mm Allen key and is made in two places as shown below. At the strap inlet the width of the strap guide should exceed that of the strap by Strap Inlet 0.5-1.0mm. -
Page 7: Troubleshooting
® OPTIMUM QUALITY MAXIMUM RELIABILITY Maintenance (cont.) Six-monthly maintenance (or every 18,000 strapping cycles) 1. Check heater plate, replacing or readjusting it as required. Ensure the heater plate is cool before carrying out this maintenance! 2. Check strap cutter in seal head, replacing it as required. 3. - Page 8 ® Packaging products from Optimax Semi and Fully Automatic Strapping Machines The Optimax ® range of strapping machinery is one of the most comprehensive available to the packaging professional. All models feature the every latest strapping technology designed to offer the user the most effective strapping solution for their application.
- Page 9 Optimax ® Warranty ® All Optimax products come with a 12 months parts or return For more information on the range of Optimax to base warranty as standard. packaging equipment please contact your Extended warranty options are also available, please ask your authorised Optimax ®...
- Page 10 ® The Optimax brand is a global standard that encapsulates the very best packaging equipment, innovation, engineering and consumables available to the packaging professional. ® Optimax offers a comprehensive technical advice service and training programme to ensure you maximise the full operating potential of your ®...
- Page 11 ® Please contact your authorised Optimax distributor for more information on the Optimax ® range of training and aftersales maintenance and service packages.
-
Page 12: Certificate Of Conformity
No part of this publication may be reproduced or transmitted in any form or by any means without the express written authorisation of Packaging Brands Ltd. Optimax® is a registered trademark of Packaging Brands Ltd. Ecopax™ is a trademark of Packaging Brands Ltd. ®...