Apollo PEX 69PTKH00143 How To Use

PEX Crimp Tool
How to use:
1. Cut tubing end squarely.
Check for and remove any
burrs.
4. Check for proper crimp
with the Go/ No-Go
gauge.
1
2. Slide crimp ring over end
of tubing. Insert fitting into
end of tubing until it stops.
Position the crimp ring
1/8" to 1/4" from the end
of the tubing and over the
ribs of the fitting.
4
For 69PTKH0015K
To remove and replace crimp heads:
1. With the handles.
fully open, press
side release spring
upward until the
hook is above the
jaw pin.
69PTKH00143; 69PTKH00144;69PTKH00185
69PTKH0014C; 69PTKH0015K
2
1
2. Slide jaw out of
position and
remove.
69PTKH-I_12/1/11
3. Place the crimping end of
tool around the crimp ring
and press the handles
together.
2
3. With the side
release spring
pressed upward,
slide new jaw into
place and release
the spring.
Matthews, NC 28105
www.apolloflow.com
3
3